need help with blinkers. this one will probley stump you

[zKaosKid]

ok here is the deal. my front turn signals do not work but my back do. not even when i put the hazards on. they all were working and then one day i noticed that my fronts had stopped working. so the first thing i did was check the bulbs. both front blew at the same time. so i replaced them. that didnt fix the problem. so i thought maybe the flasher went and it caused the bubls to blow. so i changed the flasher. well it still didnt fix the problem. so i took my test tight to it and i have a ground on both blinkers but no power. when i put power to the wire it lights up, so i know they work if they would have power. i have checked all my fuses over and over and there fine. i cant figure out why they jsut stoped working for no reason? could my switch its self be bad?

[benemorius]

It couldn't be the combination switch. Tell us exactly what vehicle you have and I'll post a wiring diagram to help get to the bottom of this.

[zKaosKid]

lol my bad..... 92 240sx hatchback w/ sr20det