NEED HELP WIRING????

[Sleeper415]

s13 red top in my 92 240sx iv got it running on 3 cilinder 1,3,and 4 and the 2end one is just driving me insain . iv changed mafs, ignitor chip, and switiched spark plugs and coilpacks and still same thing.

the only other thing that i can think of is my wiring and thats not realy my feeld. if someone can help me out i apprecate it. also can someone tell me how the wiring goes in the coilpacks harness from each coilpack to the plug that runs in the side of the manifold thank.

[Blown240sx]

Well check your wiring for that cylinder. Just use a Pinout of the ECU to find the cylinder ignition wire. Make sure it is fine then check the coil pack wires it could be cut or just bad wire or bad ground.

[Sleeper415]

checked it still same. i need to now the wire configuration

[Sleeper415]

ok so i didnt check it good cuz i just got it puring like a cat my techometer and my #2 coilpack wire was crossed in the clip. Thanx for ur help man i appreciate it.

theres just a nother lil thing that is going on my wastgate rod/pin that goes attatched to the other lil pin keeps coming loose and my car bogs some times when i give it gas its kinda wierd ?