need help wiring rb20

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

alright i need to know wich wires i need to hook up to get my rb20det to start i am using the ka lower harness....

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

You need to get constant and switched power, fuel pump ground ECU ground. Then swap the oil sending unit and knock sensors from the RB lower to the KA lower and hook them in to the guages and ECU respectively. Using the KA lower you should be fine on starter signal, speedo and reverse lights....

Post by **blk90s13** » Fri May 28, 2004 1:50 pm

did u say ecu ground ?

where the hell is that ?

i didnt ground no ecu maybe thats my problem ?

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

Looking into the computer, there are 2 wires at the far right, I believe they should be black or blakc/white that should be grounded....I will email you wiring diagrams for the RB20 now....double check them all.

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

wiating for that email ......[email protected]

Post by **xjon** » Fri May 28, 2004 1:50 pm

Jon you are awesome with being so helpful and resourceful. You are a benefit to this community. Thanks.

Post by **93RPS13** » Fri May 28, 2004 1:50 pm

please sent it to me too thanks [email protected]

Post by **blk90s13** » Fri May 28, 2004 1:50 pm

xjon wrote:Jon you are awesome with being so helpful and resourceful. You are a benefit to this community. Thanks.

jon is way too nice if u ask me i have called him over 5 times so far and he always there to help and give me ideas

thanks alot jon i wish every one around is the same way like u we have a perfect world

Post by **BoostFab** » Fri May 28, 2004 1:50 pm

so you got the motor running well?

Post by **blk90s13** » Fri May 28, 2004 1:50 pm

nope not yet

i will have saturday night / sunday /monday to get it in order

got a fuel pressure gauge in last night to check fuel then next will be compression but i am sure its some thing really stupid

the car was running 2 month ago in the video i got from japan before i purchased it

maybe i will rewire the entire thing all over again as well

Post by **OlyDriftSquad** » Fri May 28, 2004 1:50 pm

can someone send me a wiring diagram? just got my rb20 in and all i need to do now is wire her up! hit me up anybody please.. [email protected] thank`s

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

You got mail!You got mail!You got mail!You got mail!You got mail!You got mail!

Who else likes Special Ed from the Crank Yankers?

YEAH!

Post by **93RPS13** » Fri May 28, 2004 1:50 pm

Do you know any slow or special people?Do you know any slow or special people?Do you know any slow or special people?Do you know any slow or special people?Do you know any slow or special people?Do you know any slow or special people?

lmao

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

Knock Knock....

Well who is there then?

YEAH, I got you lady!!!

Wait what kind of ladies voice do you think you are hearing?

Ya, you sound like my Mom!

Wanna hear another lady?

Post by **93RPS13** » Fri May 28, 2004 1:50 pm

<-----post whores -----^

Post by **blk90s13** » Fri May 28, 2004 1:50 pm

JonPowell wrote:You got mail!You got mail!You got mail!You got mail!You got mail!You got mail!

Who else likes Special Ed from the Crank Yankers?

YEAH!

thank u jon

Post by **BoyWonder** » Fri May 28, 2004 1:50 pm

Think you could pass me some of those wiring diagrams? Trying to start my friend's RB20; have it turning over, but not starting. I have a few ideas but a solid wiring diagram will help out.Email: [email protected]Many thanks.

Post by **BoostFab** » Fri May 28, 2004 1:50 pm

JonPowell wrote:Who else likes Special Ed from the Crank Yankers?

me too, me too, me too, you gracious

Post by **blk240sx** » Fri May 28, 2004 1:50 pm

Me too Jon, if you don't mind. Thanks[email protected]

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

i started this thread and i still havent been emailed the wiring diagramn whats the deal .. why not just link it to this thread

Post by **BoostFab** » Fri May 28, 2004 1:50 pm

jon, email me the diagram and i'll host it on my server for everyone to access.

Post by **BoyWonder** » Fri May 28, 2004 1:50 pm

Here.They are big.

Thanks Jon.

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

fast_s13 wrote:i started this thread and i still havent been emailed the wiring diagramn whats the deal .. why not just link it to this thread

I sent the damn pictures to you like 3 times, maybe there is something wrong with your email, or you have given me the wrong address. EVERYONE who asked for them got a copy. I sent them out to EVERYONE who posted their address in this thread or emailed me.

COOL YOUR JETS!

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

thanx but that dont do much for me what i need to know is what wires do i need to hook up to get it to run.... i have the black/pink hooked up for the fuel pump and its working. then i have the black/red from the ka hooked to the black/red on the rb.then i have the red on the ka hooked to the white/black on the rb is there anything else i need to hook up to get my motor to run.. i have changed my ingitor twice cas and ecu and im still not getting fire... anyone with any ideas

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

You need to find out what you are not getting, if your fuel pump is working, are the injectors firing? are the spark plugs firing?

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

im not getting spark....................im getting fuel

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

You should check if you are getting power to the igniter...also check and make sure that the relays inside the car are plugged in and getting power...after that is checked, if no luck, come back again.

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

what should i do to check for power couldnt a test light short something out

Post by **JonPowell** » Fri May 28, 2004 1:50 pm

no the light bulb in the light will stop it from shorting. Unless you hit more than one wire at a time.....

Post by **fast_s13** » Fri May 28, 2004 1:50 pm

im not getting power to the ingitor... i am getting power to one of the relays but not the other

need help wiring rb20

need help wiring rb20

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums