Need help removing fabric from doors, speaker and glove

[amorasin]

I looked up how to remove the interior fabric but i soon found out that its hard as s*** to get off. I searched for quite a bit on any info but no luck even in the FAQ. Can someone show me or help understand what i need to do?

I have the grey tweed and it is not trying to come off. In the process of doing upholstery work using black thin vinyl so i need all of it off ASAP.

[amorasin]

I forgot to mention it is for my convertible, once i understand what im doing ill post a write up since its all being documented, thanks!

[krash]

Unfortunately, The fabric isn't removable from the convertible door panels. If you spend a lot of time with a wire brush, it may come off, but its easier just to get coupe doors/panels.

[amorasin]

I found that using a heat gun moderately you could slowly get a square inch off within 5 min. eventually the plastic or fiberglass heats up so i needed to ease off and take a break. It seems like if i burn it enough i will eventually be able sand it off, anyone done this before?

[krash]

I think one member has done it using a wire brush and a lot of time. But its much easier to do to coupe door swap, since thats something that usually needs to be done anyway

[loco240ltd]

the best thing to do is to wet the door panel with thinner then put it inside a plastic bag and seal it .it has to be wet real wet .give it like 30 minutes and it will do the trick.just for 10 us.