need help opening the rb25 transmission

[REDLN]

i need help getting the bellhousing of the 25 transmission.i took out the bolts holding it on. took the front cover off the input shaft. is there a trick to get the tailshaft out?

[Booztd 3]

Have you tried reading the FSM?

[REDLN]

the fsm doesn't mention any tricks to make it easy to get the tailshaft out bud.

[REDLN]

well i got mine open thanks to you mate. good write up you did i must say. and this is what mine looks like on the inside.

[IMG][/IMG]

by the way Booztd 3 you wouldn't happen to let me buy these off you and a speed sensor? as you can see i need them.

[kouki-gymkhana]

You can buy the speed sensor from the local autoparts chain or Nissan dealership. The 300zx VG sensor works just fine. Don't forget to pick up the gear for the sensor too.

[Booztd 3]

well i got mine open thanks to you mate. good write up you did i must say. and this is what mine looks like on the inside.

[IMG][/IMG]

by the way Booztd 3 you wouldn't happen to let me buy these off you and a speed sensor? as you can see i need them.

Glad to hear you got it opened, and yes it looks llike your transmission definately has some issues. I should have the parts you need. Can you email me at [email protected] to let me know what all you're interested in?

Thanks

[gawdzilla]

i'd like to see some pics of the damage

[REDLN]

well that's one i have more but i need to get some better ones cause it's done for those two.haven't opened up the rear half yet to lazy