Need help on system setup(big)

[Toshima]

I made a picture in mspaint on how I have my system setup right now. Its not for my s13 its for my sc300, But I thought you guy could help me out. I got a 2 Farad Digital Capacitor. I was wondering were it would go. Im guessing after the second battery, and have all my amps power wires going to it right? Also I was wondering If I have to many fuse. Do I only need one big fuse? Also right now every thing is 4ga, but would I gain anything by making the power and ground wire that goes from battery to battery, and then battery to cap a 0ga. I dont have any problems with the system right now amps are turned down to 1/4 there power. I turned them up to 1/2 to 3/4 there power and I blew the 2 fuse that went to the amps that power the subs. Any help would be great. Thanks

[EW]

The cap should go as close as possible to the bass amp. Larger power wire will lower resistance so using 1/0 from front to rear would be great. I would put a fuse or breaker on the power cable coming from the main battery right before it connects to the rear battery. The rest is fine.

[Toshima]

Thanks right now I have 2 bass amps and one for the highs. So hook both the bass amps up to the cap. Also does there need to be a fuse in between the cap and amps, or battery and cap, or both.

[the converted]

You probably only need a fuse near the batteries.

I have some 1/0 if you need it.

[Toshima]

So I should cancel the other fuse and just use 2? Also how much were you looking to get for the 1/0 shipped to 78644. Let me know thanks.

[the converted]

$70, email me if you have any other questions.