need help on installing alarm on my 91 240sx...

[Roger_cha]

yea as the title says.. i just bough a remote start and keyless entry alarm... and i just wanted to know on how you hook it up... i look at the wiring diagram seems simple but on the keyless entry im not sure what to hook up cause the alarm has 2 wire one for lock and the other one is for unlock and i notice that the 91-94 has only one wire for the power lock only... can anyone give me some tip or guide me through the process of installing an alarm on my 240... thanks

[onosqv]

http://www.the12volt.com

[Roger_cha]

thanks ill give it a shot to see if i can get it to work...

[Roger_cha]

well i got the alarm hook up but i tink i still have problem... i bought this alarm on ebay http://cgi.ebay.com/ws/eBayISA...92774 and the problem is that i hook it up and try it out the keyless entry dont work i thought that my 240sx is a one wire power lock but i check that my 240sx is a late model 90 so i have 2 wires... so can anyone give me some tips or has anyone try installing this alarm before that can help me out thanks...

[onosqv]

Then do the 2 wire install - both diagrams are available @ the site I gave above; you may just have to look/search a bit...

there's really not much to it once you have the diagrams from that site + the instructions in ur manual.

[Roger_cha]

yea you are rite i have the diagram and the and everything.. i follow all instruction and hook up everything that the diagram says but still the power door dont work i dont know if i have to use a relay...

[onosqv]

There's 2 methods: relay or diode.

I remember finding tons of info on it @ that site & on google.