Need help finding a transmission
Need help finding a transmission
Ran some conservative numbers on the built out motor I'm going to have completed in around a year. Looking at with like some big t4 TT setup with completely rebuilt engine putting down about 550-600rwhp. Anyone pushing numbers at this or higher that could recommend a transmission that could hold up to like 650rwhp to be on the safe side. Thanks in advance
Re: Need help finding a transmission (colbol89)
going to be on an 2006 VQ35DE Rev Up engine and preferably mount up to the stock bell housing.
-
rmezz13
- Posts: 1634
- Joined: Tue Nov 27, 2007 9:15 pm
- Car: Had 2004.5 Nissan 350z
Have 96 f250 and mommas 07 Murano
Re: Need help finding a transmission (colbol89)
LSX + Nitrous FTW and probably less money... There is a place in Indiana i heard about like 2 years ago that can build you a bullet proof transmission... Thats the only lead i have for you, oh yeah and its like $5kish (+/-)
I would start building it now and just worry about the bridge when it is time to get there. For not yet starting on the "build" that went from 380whp to 650+ in one thread, you need to get started before you go worrying about that much power and what can take it. It wont happen in a weekend job. You've already been told the stock one can handle about 600... Other than that, have one built.
I would start building it now and just worry about the bridge when it is time to get there. For not yet starting on the "build" that went from 380whp to 650+ in one thread, you need to get started before you go worrying about that much power and what can take it. It wont happen in a weekend job. You've already been told the stock one can handle about 600... Other than that, have one built.