Need Advice....

[brunswick240]

Hey guys hows it goin... i havent posted in ages but im back and in need of some help. Im puttin my engine back together (spun 3 rod bearings and 1 main --- yaaa not too fun) and i need a new clutch. My future goals are to just have a nice t28 setup, nothing too crazy, just enough to give me a quick car but still keep a decent amount of reliability vs. a t3/t4 setup where i might lose more of the reliability. I know that i wont get over 300whp reliably with stock bottom end and that is ok with me. So my question is what would be a clutch you guys suggest for a t28 setup running 10-13psi daily? Also what other parts should i look at replacing while the motor is disasembled?

[nelson8708]

all new bearing of course....lol. I would go ahead and put some forged pistons in it. Just so you could have a piece of mind. If you boost spike or the wasge gate hose gets cut you would be ok. Maybe have the bottom end balanced while your at it. You could gain some decent power and it would make the motor last a little bit longer.