NEED A LITTLE RB25 HELP!

ONLY for ADVANCED technical discussion about the 240sx!
aRBy25det
Posts: 3
Joined: Wed Sep 08, 2010 2:19 pm
Car: 92' 240sx coupe--rb25det 344whp 300wtq

Post

here is my problem: when i start my car for the first time during the day it runs fine, no problems at all. air/fuel ratio is good runs and drives fine....probably after a good 30mins of driving the car, it wants to run lean at idle, like 16-17 a/f....and when im coming to a stop, sometimes it will cut off and i gotta crank it back on....now i talked to a friend and he says it sounds like the fuel pump...i have a walbro 255, maybe its gone bad? if anyone could chime in on this and help me out, would be much appreciated...oh and the car was tuned from a respectable tuner about 2 months ago and made 344whp and 300wtq....

THANKS!


aRBy25det
Posts: 3
Joined: Wed Sep 08, 2010 2:19 pm
Car: 92' 240sx coupe--rb25det 344whp 300wtq

Post

no one has ever had this problem??

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

well i just went through this with my sr20. my coolant was low so when it warmed up it was running lean. i fixed the leak and topped it off and problem solved. have you checked fuel pressure? also this problem didnt start happening till it got cold...im thinking about turning up the fuel pressure a little bit.

aRBy25det
Posts: 3
Joined: Wed Sep 08, 2010 2:19 pm
Car: 92' 240sx coupe--rb25det 344whp 300wtq

Post

compactfean wrote:well i just went through this with my sr20. my coolant was low so when it warmed up it was running lean. i fixed the leak and topped it off and problem solved. have you checked fuel pressure? also this problem didnt start happening till it got cold...im thinking about turning up the fuel pressure a little bit.

dude does this make any sense to you?? i dont have the problem when i down shift every time i come to a stop....i swear if i dont down shift when stopping it continues to run lean at idle........is there something im not getting here? plz fill me in


Return to “240SX Technical Forum”