Need a couple of revolution sensors

[MaximA32]

Alright guys. My CEl has been on for some time now and I'm just getting around to fixing it. The problem is the Output Speed Sensor or as Nissan calls it, Revolution Sensor. There are two of them and I need both. If anyone is parting out a trans, I would be more than happy to buy them from you. Let me know!!

[MaximA32]

No one is parting out a 6th gen eh?

[MaximA32]

Anyone? This sensor is causing serious driveability issues for me.

[Fig Newton]

Didn't know there are two revolution sensors? Saw a picture of only one.

Info from another forum : for a Nissan Sensor Assy (Revolution Sensor) call Dave Burnette in Austin Texas at Southpoint Nissen 1 888 254 6060 Ext 117. cost $121.90.

This problem showed up as a code Po 720. My car would lose power suddenly, from 50/60 to 20 mph, and the rpm would rev up. Would pull over and stop. Sometime would start up ok or i would limp praying to the dealership.

Did everything: new tune up and maintence, 6 iginition coils, one(out of 4) o2 sensor, speed sensors, thottle body, etc, etc and finally this code. Taking it in tomorrow and hopefully my problem will be solve. If not will let you know.

[MaximA32]

I'm well aware of what the issue is. That's why I need this sensor.

[MaximA32]

So it turns out that the contacts on the sensor were corroded and inhibiting proper current flow. I cleaned up the contacts and hit it with a spot of dialectric grease and she's good to go!

Fig..I woul look into that as well.