N60 MAFS HElp

[Darius2250]

I was looking at the N60 Mafs I have and well I have the plug no wires I tried looking for a wiring diagram but can't really seem to find one. Figure I would just pin it with the CA MaF pins, can somebody help me?

ABCDEF - n60_ABCD - Stock CA

Also I am running an SAFC 1

I was thinking that the wireing configuration would go ABCDEF - N60 ABCD -Stock CA

The resoning behind this is that I read somewhere that if you cut the edges on the N60 and just plug your stock CA MAFS plug in that will work.

does this sound resonable?
Modified by Darius2250 at 9:11 AM 5/11/2006

[c-rad]

A - not usedB - signal wire to the ecuC - ground wire to the chassisD - ground wire to the ecuE - power wireF - not used

[float_6969]

!!!EDITED!!!ABCDEF - VG MAFS_DACB_ - CA MAFS

Ok, I corrected my post. If what Chris posted is correct, then the above is correct.

[Darius2250]

thank you very much

[c-rad]

!!!EDITED!!!ABCDEF - VG MAFS_DACB_ - CA MAFS

Ok, I corrected my post. If what Chris posted is correct, then the above is correct.

That's how mine is wired and it runs fine.

[Darius2250]

Thank you very much