My Xat racing dyno on 11 lbs and pics

[extreme135]

I was down in the tampa area this week and was able to get my car dynoed and tuned on the apexi neo, as you can see in the dyno graph my first run I was runnin really rich, 9-1 a/f or lower and made 278whp and 288 torque on about 13lbs, but they had a apexi neo in stock so they installed it to my JWT ecu down to a safe 11-1 A/F and on only about 11.5 lbs was able to get 292whp and 310 torque, on the third run It made 299whp and 307torque on the same boost, also here are some pics of there cars and the sweet S13 TA KA-T, which they said is making over 400whp.





















Modified by extreme135 at 8:16 AM 1/14/2007
Modified by extreme135 at 5:16 PM 1/17/2007

[Poor_S13_Driver]

Nice numbers indeed. Setup?

[extreme135]

Stock Block internals, Garrett t3/4 60A/R .48 exhaust, tomei 615cc inj.,N62maf, JWT ecu fine tuned wth Apexi Neo, XS engineering atmospheric Bov, front mount w/2.5 inch. piping, greddy type s electronic boost controller, Findanza 11lb. flywheel, Centerforce Dual Friction Clutch, B&M shifter, VLSD, Peak performance transmission mount, nismo motor mounts.
Modified by extreme135 at 2:43 PM 1/16/2007

[Florida240sx]

Where you at? Want to go to Bithlo?

[WDRacing]

Make sure you stack the IMG tags so the pics are on top and not beside each other. I fixed it for ya...so much easier to read this way.

Great shots BTW

WD

[BoostFab]

not bad.... are you running a stock block internals?

[Chezedik]

Was it a T3/T04e?

[WDRacing]

Man, if you thin out that fuel a bit, and add some alcohol injection, you'll be making ALOT of power. You have to love dyno sessions and tuning.

WD

[Edub1]

I'd try to find out how much timing is pulled in the JWT tune. From what I've heard they pull crazy timing from nearly the whole map.

Also, your A/F ratio shoul be between 11.5-11.9.

Nothing personal but with what is know about tuning I fail to see why people keep going the JWT route.

[Jookmasta]

perhaps u should edit out that license plate on the aqua zenki. could be a customer's car and there's too many thieves in this world.

nonetheless, nice numbers.

[extreme135]

Thanks for fixing the IMG wdracing, I'll remember that, I plan on fine tuning it a little and leaning it out some more, but I am still on stock internals so i am trying to be safe with the A/F, I have looked into the alcohol inj., i have a spare KA I plan on building for some serious power, but for now I am happy with this setup, but if I would have done it all over again I would have gone with a AEM ems, and I fixed the License plate, good point, and Florida240sx i am located in Jax, fl, where are you located and when and where is Bithlo going to be.

[Neejay]

Damn, nice numbers. Estimate $ spent?

How is that Centerforce Dual Friction Clutch? I'm going white bunny special (300z clutch with D21 pickup flywheel) and I'm planning on getting the Centerforce Dual Friction Clutch.

[Florida240sx]

I'm in Daytona Beach. I can get to you in about 2hrs....1hr if it's 2am.... Bithlo is in Orlando. Any tracks up there?

[eazye2000]

Man, I'm stuck way the hell up here on Hanscom AFB in Massachusetts...Florida is where I'm from originally. I'm from Inverness in Citrus County on the Gulf side..Crystal River, Homosassa, Spring Hill, Brooksville area. I'll have to get some contact info from you guys so I can hit you up when I'm down there. I plan on coming down Mid-Late February for my birthday. Message back, or hit me up on:

MSN: [email protected]: EazyE4YouYahoo: eric_appiexFire: yodaman69

OH yea, my apologies for thread-jacking/hoarding.. lol

[extreme135]

I dont really know the exact amount spent but I kinda wasted alot of $ at first, like many people I am sure can relate, but I would say about $4-5K on my kit and drivetrain and tuning + car and my labor/time.And as for the centerforce DF, I like it very well, it grabs good, never have had any slipping problems, even on the stip, it has a very stock feel which i like compared to my 6 puck I had prior.

[extreme135]

Not any tracks up here, they are suppose to building one though for 2008, Have you been to any 240 meets in jax, I think I may have seen your car before, I've been to speedworld a many times, you ever go out there.

[eazye2000]

You guys ever hit the track up in Gainesville? That ones not too bad. Sure beats anything we got up here. I have to drive to New Hampshire, and then I'm almost near Maine.

[ghx407]

Nice numbers man, congratulations!

[s14sleepyeyez]

Nice numbers, seen this car in person at the J-ville meets, gorgeous zenki.

Hey bro you goin to the meet this weekend?

[extreme135]

We go to the Gainsville track quite abit, its a pretty good track compared to most, and s14sleepyeyez I s will probably be at the Jax meet this weekend at Tinseltown.

[Neejay]

Really? Gainesville is my hometown and I come there every now and then.

[Florida240sx]

Meet this weekend in jax? Haven't heard about it. Went back in sept and oct IIRC Did the photoshoot in the garage and then was up there when the one guy wrecked in the subdivision, good thing I had my tow rope...Track in Gainsville???? Might be worth a drive if I got someone wanting to buy my friends rims.

[extreme135]

yeah there is a 240 meet this saturday at 9pm at the movie theater in tinseltown off of southside blvd, Yeah and the Gainsville track would definetly be worth the trip.

[Florida240sx]

set up a day in march? for the track

[jrsink]

xat ftw!

i'm getting my tune and new turbo on my fully built ka in my vert, next weekend!!

looking for to4b's

[Florida240sx]

Was on a dynojet today..but the dyno broke shortly after my run.. There was an old z28 with 15" wide tires that onyl dynoed 272hp. Then the shops r33 skyline at 7psi and it only made 285hp then a fully built old Malibu only made 235hp. B.S.

[extreme135]

Did you get a chance to get some #'s for your car.

[Florida240sx]

Dyno broke. It wa sone of the one's on a trailer that they bring to events. Was reading low #'s. A built 302 with 15" wide tires only put out 272hp (CAR after me) I put out 278hp and 265ftlb at 12psithen 274hp and 250ftlb at 10psiI'm going to a real dyno this weekend or next, with my new wastegate spring in.

[nissanfanatic]

For all you Gainesville and surrounding area guys, check out http://www.intmo.com for Florida stuff. Its a local car club that also goes to a lot of different car events. Its a pretty good place to find out about stuff going on.. I am still in the club, but unfortunately I'm stuck in Va..