MY sneak peak

Post by **nismo1219** » Wed Apr 04, 2007 2:27 pm

well, seeing jeremiah's "peak" gave me an idea to show anybody interested what ill be working on over the next few weeks. this is more or less for noah, so he can see that his splitter rods will not go to waist, lol! anyways, im working pretty hard right now and trying to save up some extra money (while planning/saving for a wedding) to get this kit painted and installed. then, i plan to add a carbon fiber front splittler - hence, the splitter support rods. THANKS AGAIN NOAH, YOU 'DA MAN!!

note - sorry for the "not-so-great" pics, sunlight was coming straight at me.

Post by **A.Tech** » Wed Apr 04, 2007 2:35 pm

lucky... I want a stillen lip...

Lucky...

Post by **A.Tech** » Wed Apr 04, 2007 2:37 pm

Did he sell you the Lip? How much?

Post by **nismo1219** » Wed Apr 04, 2007 2:55 pm

nah dude, i bought the WHOLE kit from stillen last summer before NOPI but ran out of "funds" to have it installed so its been sitting in the garage this whole time, lol. everytime im about ready to have them painted and installed it seems like something always pops up, but i think im finally getting close to being able to put it on...hopefully! noah sent me the support rods, which will be installed soon after the kit along with the mentioned carbon fiber front splitter!! WOO HOO, i cant wait!! keep your fingers crossed for me!!

Post by **jltibbs** » Thu Apr 05, 2007 2:45 am

sweet bro. i still think i'm going for the CF lip kit. :

Post by **MinisterofDOOM** » Thu Apr 05, 2007 2:48 am

Looks good. Really subtle but adds a lot.

Post by **BMAR240SX** » Thu Apr 05, 2007 2:48 am

Damn your car makes me want to get a maxi myself

Post by **nismo1219** » Thu Apr 05, 2007 4:41 am

ok guys, im pretty bored right now so i decided to take my gauges out of the closet, dust 'em off, and do a "test fit" to see what they will look like. they are autometer cobalt series for a/f, transmission temp, and volt. what do you think?

Post by **jltibbs** » Fri Apr 06, 2007 2:42 am

looks pretty ghey if you ask me. but then again, you've always been J/K ben. looks great bro.

Post by **audtatious** » Fri Apr 06, 2007 4:43 am

Do it real and get a V2 for that bish!

Did Beaner remove his CF spoiler or make you one?

Post by **nismo1219** » Fri Apr 06, 2007 5:22 am

jeremiah - shut up! j/k

matt - do they even make s/c's for 4th gens anymore? beaner-wiener cracked his splittler over a curb or something so he took it off. i told him about my plans one day while we were talking and he told me he had a set of the support rods laying around so i volunteered to take them off his hands and he graciously agreed! they are great, im really looking forward to getting the kit painted/installed and then getting a carbon fiber front splittler. i think it will look tizzight!!

Post by **Loki2daMax** » Fri Apr 06, 2007 10:08 am

Lookin Good Bro! Keep it up Kid

MaximA32 · Post by **MaximA32** » Fri Apr 06, 2007 1:46 pm

nismo1219 wrote:do they even make s/c's for 4th gens anymore?

No, they do not. I've been searching for a Stillen V2 for some months now and no such luck.

Post by **nismo1219** » Fri Apr 06, 2007 2:21 pm

kenny, let me know if you find anywhere that has them, or if you find somebody with an extra used one. ill definatley grab one up with ya!!

Post by **maxhopper** » Fri Apr 06, 2007 5:51 pm

Well actually there is someone on that other Maxima site that makes the mounting plate for the Vortech supercharger. You just have to buy the SC and related components, and you can have a kit comperable to the Stillen kit.

Post by **nismo1219** » Fri Apr 06, 2007 6:01 pm

id rather find a "1-stop-shop" kit and all. IMO it would be easier than trying to piece/custom fab something together. what do you think?

MaximA32 · Post by **MaximA32** » Fri Apr 06, 2007 6:12 pm

maxhopper97 wrote:Well actually there is someone on that other Maxima site that makes the mounting plate for the Vortech supercharger. You just have to buy the SC and related components, and you can have a kit comperable to the Stillen kit.

I refuse to deal with that other site. They can eat my grundel.

Post by **maxhopper** » Fri Apr 06, 2007 6:23 pm

With Stillen no longer making the V1 or V2 kit for the A32, I guess you have to take what you can get. While I'm not a supporter of the other site, I do feel an obligation to tell the truth where it applies.

And since I'm not sleeping with any of you creeps, I have no problem in that regard.

Post by **nismo1219** » Sat Apr 07, 2007 3:48 am

maxhopper97 wrote:And since I'm not sleeping with any of you creeps, I have no problem in that regard.

is there any chance stillen would relase some more kits if there where enough interest? like maybe a special "NICO donation" kinda thing?

Post by **audtatious** » Sat Apr 07, 2007 3:58 am

Unfortunately, that is doubtful. Honestly, I don't understand why they could not do the modifications needed and continue the SC kits for 5.5-gens and 6th gen Maxi's.

Post by **nismo1219** » Sat Apr 07, 2007 4:02 am

well i dont understand why not! you know they still have the molds/blue prints and what-not needed to make a kit so it cant be all that hard. they made them for 4th gens before so you know they know how to USE the molds/blue prints as well. i think we should get a "petition" and proposition them!!

i know we have 2 people so far...1) kenny2) me (ben)

anyone else???

Post by **audtatious** » Sat Apr 07, 2007 4:09 am

I will bring it up to Greg and see if he can use his contacts at Stillen to get an "official" answer.

Post by **nismo1219** » Sat Apr 07, 2007 4:31 am

awesome, thanks matt!

Post by **audtatious** » Sat Apr 07, 2007 4:47 am

No issues. I would have probably gone SC on mine if they had something available.....

Post by **jltibbs** » Sun Apr 08, 2007 4:36 am

pullin out the big guns eh?

Post by **nismo1219** » Sun Apr 08, 2007 1:12 pm

hey matt - let me know if you hear of any good news about them s/c's!! im keeping my fingers crossed!!

Post by **nismo1219** » Tue Apr 10, 2007 3:25 pm

bumpitty bump bump...matt?? (just curious)

Post by **maxhopper** » Tue Apr 10, 2007 4:33 pm

I was already trying to work on something before Matt posted. So far my efforts have not proven fruitful.

There is a meet scheduled to be held at Stillen HQ on May 13th, so if I don't have a response by then, Matt or I will have Greg address this at that meet.

We'll try to work out something since there is interest, but just ask that you guys be patient while we try to get things lined up.

MY sneak peak

MY sneak peak

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (A.Tech)

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (jltibbs)

Re: MY sneak peak (jltibbs)

Re: MY sneak peak (BMAR240SX)

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (audtatious)

Re: MY sneak peak (nismo1219)

Re: MY sneak peak (NSR A32)

Re: (maxhopper97)

Re: (maxhopper97)

Re: (maxhopper97)

Re: (nismo1219)

Re: (audtatious)

Re: (nismo1219)

Re: (audtatious)

Re: (nismo1219)

Re: (audtatious)

Re: (audtatious)

Re: (nismo1219)

Re: (nismo1219)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums