my skate board

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

Lookie what i did today

s13guy i know you're still learning so listen to my advice, shopping carts and skateboards don't mix

and listen to pennywise while you skate

Post by **Mr1der** » Tue Aug 03, 2004 7:41 am

gahdamn!

Post by **NIGHTfall_240sx** » Tue Aug 03, 2004 7:41 am

muahahaha i use to skate with my buddy all the time and he would snap boards like crazy... but then again he landed 360flips off staircases all the time.. man i miss skateboarding now lol... i wasnt that bad either, use to goto alot of comps and come backwith 2nd or 3rd... never landed a 1st place though

Post by **navysnail** » Tue Aug 03, 2004 7:41 am

i was with him when it happened,about 2 min later, security kicked us out

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

may she rest in peace she has served me well

Post by **Bryants95240sx** » Tue Aug 03, 2004 7:41 am

lil bit of ducktape jbweld ,good as new..lol

Post by **navysnail** » Tue Aug 03, 2004 7:41 am

lol

its all for the better now, hes gona get neon pink trucks, those will be awsome, i cant think of a better color for trucks (seriously, i want them)

Post by **[Zero-S]** » Tue Aug 03, 2004 7:41 am

It'd be a way to make a statement

Post by **Megaseth** » Tue Aug 03, 2004 7:41 am

you should use some CF to fix it, that way it would be lighter.

Post by **Mr1der** » Tue Aug 03, 2004 7:41 am

kinda makes you wonder if anyone makes a CF deck...

Post by **w1ngzer0** » Tue Aug 03, 2004 7:41 am

DO IT!! DO IT!!!

take off the trucks (i think thats what they are called.) put the broken pieces together. Take a sheet of CF cover one side of the board. I would recommend what they called "weaving" CF in the middle and use sheets on the outside, then weave on the edges!! Do the same to the other side and weeeeeeee:ylsuper

Post by **fiznat** » Tue Aug 03, 2004 7:41 am

can you drift on your skateboard?

Post by **Megaseth** » Tue Aug 03, 2004 7:41 am

make sure to roll the edges.

Post by **silkk** » Tue Aug 03, 2004 7:41 am

get nos for it

Post by **[Zero-S]** » Tue Aug 03, 2004 7:41 am

I wonder...CF deck with an aluminum/titanium center.

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

fiznat, i can kinda drift on my skateboard if i go through sand on concrete

Unfortunately its beyond repair, ima have to buy a new deck and trucks which will take a while as im broke.now im skateboardless and it sucks

Post by **Ghettokracker71** » Tue Aug 03, 2004 7:41 am

Some JB weld and those trucks are as good as new!!! A 2x4 nailed on the top,and bottom of the board where it was broken,and your straight.

Post by **[Zero-S]** » Tue Aug 03, 2004 7:41 am

[Zero-S] wrote:I wonder...CF deck with an aluminum/titanium center.

Post by **Megaseth** » Tue Aug 03, 2004 7:41 am

2x4?? nah, just some plywood. 2x4 would hinder the performance.

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

Megaseth wrote:2x4?? nah, just some plywood. 2x4 would hinder the performance.

bingo

Post by **navysnail** » Tue Aug 03, 2004 7:41 am

you guys forget, the cf on the tail would come apart and unwind after liek 3 days

and those pink trucks, are soo much better then fixing those purple and white ones

Post by **crzycav86** » Tue Aug 03, 2004 7:41 am

Did you break that thing doing one of those rail grinds? If so, all I have to say is ouch... and good luck having children in the future

Post by **krazy skwerel** » Tue Aug 03, 2004 7:41 am

This is why BMX/street is superior! Mwahahaha

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

no thankfully i wasn't high on a rail, my balls where saved. the truck cracked after a collision with a shopping cart, i had been grinding that day on a concrete ledge that was only a about a foor of the ground

Post by **cosmo** » Tue Aug 03, 2004 7:41 am

ha, I'm kind of in the same boat. I focused mine last nite.

Damn you backside heels!!!!!

Post by **BuudWeizErr** » Tue Aug 03, 2004 7:41 am

zipties!

i never broke a truck in 3 years of skateboarding... grinded them down, yes, broke kingpins, yes, but broke, no. quality must have gone downhill since I quit like 5 years ago. I did break boards though. a lot of boards.

Post by **Mr1der** » Tue Aug 03, 2004 7:41 am

I can't ride a skateboard:(

nor am I a fruitbooter.

Post by **ilovedrifting** » Tue Aug 03, 2004 7:41 am

well at least your not a fruitbooter cuz that not be cooli haven't seen anybody ever break there trucks so idk how i managed to do it

Post by **Mr1der** » Tue Aug 03, 2004 7:41 am

beats me. They look like aluminum...

I think you need titanium this time!

Post by **CrashGordon** » Tue Aug 03, 2004 7:41 am

damn, How are your ankles??

I used to skate a little, But i was always a biker through and through. I would break frames like once a month. It was awesome. I have a bicycle graveyard in my barn at my house.( I have like 3 S&M dirtbikes, prolly 5 or 6 S&M war pigs, and a ton of other bikes sitting in piles. I remember one time that i was doung a 360 transfer and i cased the lip on landing and the rear triangle snapped completely off. It really sucked.

After I broke my back, and my legs my doctor told me not to ride anymore. He said that I had a choice, but if i kept riding, things wouldnt be good.

Now when i look back at those days, that was the best 10 years of my life, sure i broke over 20 bones, but I got to travel the world and get payed to ride a BIKE!!

Now I have to actually work to make a paycheck, It really sucks to grow up.

KEEP ON SKATING TILL YOU CANT GO ON

my skate board

my skate board

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums