my ride

[bballcrazy30]

I am new to this forum so i just wanted to introduced myself to the forum and show off my ride. My name is Joe and i have a 2006 Altima SER. Everything is stock except for spectuning intake. Here are some pictures

[phobs]

Welcome to Nico, ride looks clean

[bballcrazy30]

Welcome to Nico, ride looks clean

Thank you very much

[SlateSER1788]

Welcome! I have the same color but with the black and grey seats instead of the black and red.

My girlfriend lives in Lyndhurst so I drive down to see her a few times a month, I'll keep and eye out.

[bballcrazy30]

Welcome! I have the same color but with the black and grey seats instead of the black and red.

My girlfriend lives in Lyndhurst so I drive down to see her a few times a month, I'll keep and eye out.

Yeah i live prob about 40 mins from lyndhurst. but during the summer i go down to englishtown raceway to race. Ive only raced the ser once though and ran a 15.05. Not too good but i lost some time spinning off the line. Hopefully next time ill get in the mid to lower 14's

[Darius]

Beautiful car! Very clean!

[bballcrazy30]

Beautiful car! Very clean!

Thank you

[saywat]

the front looks like its doing some hyro pumps. please drop it asap

[SlateSER1788]

the front looks like its doing some hyro pumps. please drop it asap

Yes... was one of the first things I did. I ordered a set of Tein S. Tech lowering springs (lowers front 1.9") and JUST installed the fronts, not the rear. By doing that it made my wheel gap the same in the front as it is in the back, and countless people who have complemented my car have said "how much did you lower that?!" so it's not like you can't tell.

eBay sells the springs for about $215 shipped.

[bballcrazy30]

Yes... was one of the first things I did. I ordered a set of Tein S. Tech lowering springs (lowers front 1.9") and JUST installed the fronts, not the rear. By doing that it made my wheel gap the same in the front as it is in the back, and countless people who have complemented my car have said "how much did you lower that?!" so it's not like you can't tell.

eBay sells the springs for about $215 shipped.

Yeah that will def be a future mod. Before i do that though ill be looking to get a racelining y pipe.

[migs7585]

Looks sweet....had an 06 before my A/C...loved it.....if you ever wana sell your rims let me kno

[Idrivelow]

Joe it says you live in Old Bridge. How long have you lived there. I graduated in 97 from OBHS.

[lino]

That's a really nice color for that car .

[bballcrazy30]

l

Joe it says you live in Old Bridge. How long have you lived there. I graduated in 97 from OBHS.

Sorry i havent been on this forum in a while. Ive lived in old bridge my whole life but i went to SJV not obhs. I graduated in 06 from there so your a little bit older than i am lol

[bballcrazy30]

That's a really nice color for that car .

Thanks this actually wasnt the color i wanted at first. I wanted a silver or black but then when i saw this color in person i fell in love. It looks alot better in person than in pictures.

Just an update for everyone, I just recently added a NWP Vias Block plate as my latest mod.

[lino]

The color looks great even in the pics.

How do you like the NWP Vias Block plate?

[bballcrazy30]

I didnt get a chance to install it this weekend cause we had a horrible snow storm but ill prob do it next weekend. Im sure ill love it because i hear you get a nice punch in the higher rpms. You lose some low end power but gain a lot in the top end. Should be good for the 1/4 at the track.

[lino]

Cool. Let us know when you get a chance.

[juan-da-man3.5]

Yes... was one of the first things I did. I ordered a set of Tein S. Tech lowering springs (lowers front 1.9") and JUST installed the fronts, not the rear. By doing that it made my wheel gap the same in the front as it is in the back, and countless people who have complemented my car have said "how much did you lower that?!" so it's not like you can't tell.

eBay sells the springs for about $215 shipped.

yikes bro be careful from ebay i was gonna buy my s tech for my 3.5 of them and then called up tein customer support to ask if there was anything i had to lookout for and they said they were having problem with fake teins selling on ebay im not saying urs are just staing should be careful i got sent to an athurized tein shop and got that prize match

[juan-da-man3.5]

other than that clean a** altima bro

[fiveliterbeater]

i love SE-R altimas!!! how much did you pick it up for might i ask?

[bballcrazy30]

Wanted to let everyone know that in jersey we had some good weather the past few weeks and about 3 weekends ago i installed the vias block plate. I love it. I can feel a noticeable gain around 4500 and up. I also dont notice the loss of low end torque. I can also hear a slight different in deeper tone from the block plate. I highly recommend it to anyone who has not yet purchased this modd. Best bang for buck

[sentrastace]

damn i love altima SE-Rs so bad.

[SlateSER1788]

Yes... was one of the first things I did. I ordered a set of Tein S. Tech lowering springs (lowers front 1.9") and JUST installed the fronts, not the rear. By doing that it made my wheel gap the same in the front as it is in the back, and countless people who have complemented my car have said "how much did you lower that?!" so it's not like you can't tell.

eBay sells the springs for about $215 shipped.

yikes bro be careful from ebay i was gonna buy my s tech for my 3.5 of them and then called up tein customer support to ask if there was anything i had to lookout for and they said they were having problem with fake teins selling on ebay im not saying urs are just staing should be careful i got sent to an athurized tein shop and got that prize match

Yes there's a lot of fakes out there that just paint the springs green and call them "Teins". But I got lucky I guess, mine have the white Tein logo stamped on the springs as well as the part numbers.