My pilot bushing is MIA! Crap!

[kouki-gymkhana]

Guys, I'm knee deep in my RB25 swap and while degreasing and powerwashing my engine and transmission, I noticed that I'm missing the pilot bushing. Does anyone know if this part cross references with a USDM Nissan so I can pick one up? I tried searching in the RB parts number thread and using the general search button but to no avail. Also, has there been any consensus about which T/O bearing to use for a series 2 RB25? All the threads I've seen say conflicting things about using the n/a z32 300zx, z32 300zx TT, or the z31. I have an XTD 6 puck sprung hub for an n/a z32 but I just want to make sure.

Thanks!

[Joe]

all 5 speed nissan pilot busings are the same.

[gawdzilla]

i'm going to be using 32202-b9500 for my rb26 w/ rb25 transmission. usdm part. hopefully it will work like its supposed to

[irocsx2002]

zerothread?id=108854

[hashiriya13]

The bushing that comes with the XTD kit fit fine in my rb20. However I am not very happy with the clutch itself. It seems to work just fine but I just dont like the feel or engagement. I have the ACT on my 25 and am allot happier with the ACT. But for the price and being a temp clutch(for me) you cant beet the XTD price. Anyway i had no problem with the bushing that came with the kit so it should be fine on the 25 as well.

[rb250sx]

NA Z32 TOB for a series 2 RB25 motor and i believe the NA Z31 berring fits the series 1.

[goofynick6]

all 5 speed nissan pilot bushings are the same.