My Ka24E Build

[JDMKorea240SX]

So I recently bought a 1989 240SX Fastback SOHC. Im planning on turboing this winter. I still need to do a compression test on the cylinders. Which i plan on doing with in the next couple of days. Aslong as those I see 155 psi across the board. I will continue my plan. My plans are for a complete CXRacing T3/T04E Turbo Kit, BRM Exhaust, 255 Walboro Fuel Pump, SR 370CC injectors, Z32 MAF, and a SAFC.

I am wondering if anyone has any problems or suggestions for this set up.The motor was recently rebuilt but i dont know the exact mileage on it. It runs very strong and is extremely clean. The only other thing i can think of that i might upgrade is my radiator. Due to the fact that the previous owner or auto dealer. Said he over filled the resevoir and there seems to be coolant all over the place. But when i look in it(resevior) its extremely dirty and sluggy. I plan on flushing the radiator and replacing the resevior.

[Ilvemynissan]

Nice, sounds like fun, post some pics of your car.

[JDMKorea240SX]

There is some body work that needs done which i will be working on over the next couple of months. There is a hole in the rocker panel. Which i will be repairing and many many dings and dents. Afterwards a two toned Black top/ Nissan Burnt Orange paint job will be done.

[bloodsport]

sounds like a good build, but sr inj are side feed you have top feed inj...

[JDMKorea240SX]

haha **** i read that too! Thanks blood

[shimizu_17]

get a tuned ecu as well. Your car will be safer, run better, and have more power. Emance tunes for single cams and its pretty cheap. Plan on getting a wideband as well cause that will help you see how your car is running.

You can grab injectors off a rx7 I forgot exactly what year but Im sure other members can tell you which ones to get.

[JDMKorea240SX]

Where can i purchase a tuned ecu from jason of emance?? websites or phone number?

[shimizu_17]

send him a pm on ka-t.org his name is nosajton. I believe he also sells his ecu tuning services on ebay so check out ebay.

I think there is a forum member on here that helps jason aka emance sell his tunes.

[JDMKorea240SX]

Thanks shimizu i PMed jason with all my specs and hopefully will hear back from him soon. I also found HKS high impedance 480CC injectors so hopefully those will work with my set up.

[bloodsport]

a got my dsm 450's for $90.00 shipped