My Current Build Progress

[tom@ica]

http://www.Rockauto.com'88 Pulsar SE

Tensioner- BECK/ARNLEY Part # 0241084 - 27.79IdlerPulley- BECK/ARNLEY Part # 0241085 - 31.89

Im am nearing $8000 on the car total so far. Lots to go though!

[DALAZ_68]

ohh snap good info...preciate it...it hit me like an hour after that it might just be the N/A CA pulley aswell

[bentvalves]

I am nearing $8000 on the car total so far. Lots to go though!

dang, talk about a solid relationship with your bro....good stuff man, keep up the good work!

[tom@ica]

Ok i haven't touched this car in about a year. Its time to start again. My brother is coming into town to help finish it. I need some help to see what else i need to finish the motor.

Here is a list of what i have for the engine:

*CA18DET*Harness/ECU*S14 T28*Circuit Sport SS Lines*Nismo Mounts*Greddy Metal Head Gasket 85mm, 1.4mm*Greddy timimg belt*ARP Head Studs*ARP Rod bolts*ARP Flywheel Bolts*Megan Downpipe*Megan Turbo Elbow*Megan D spec Catback*Nissan Turbo Gaskets*Full Ajusa gasket kit*Auto meter boost gauge*KA Throttle Body Port matched Manifold*Energy Rack Bushings*CS Clutch line*SR Flywheel/Clutch*XS Power Turbo Manifold*ACL Rod Bearings*ACL Main Bearings*Battery Relocation Kit*Battery Disconnect Switch*Battery*Mishimoto Radiator*Samco Hoses*SSAC FMIC*New Oil pump*New water Pump*Gear Reduction Starter*New Tstat*New O2 Sensor*New belts*New spark plugs*Ka Trans with CA Bellhousing*Z32 Maf*All fluids

Added:

*Taurus Fan*CS 255 Fuel Pump

What am I missing??

Any help is greatly appreciated!!

Any some pictures of current state:





I know i need wheels! And i need to repaint the motor. And i am taking the secondary butterflies out as well.
Modified by tom@ica at 1:28 PM 10/6/2009

[prtrillaboss]

sweet build!

[Ca_Silvia]

Who is doing the tuning and what kind of clutch do you have?

[r34 gtr]

I like those wheels on the front in the last picture. Just find a set for the rear and you'll be set.

[ca18detgabby]

I like those wheels on the front in the last picture. Just find a set for the rear and you'll be set.

look like rewinds...... going to need some heafty spacers for those over fenders to look good.

[tom@ica]

prtrillaboss -Thanks! its getting there!

@Ca_Silvia - Right now i have a Stock SR Flywheel and exedy clutch for SR i got from a friend. They will do for now since i just need to get this thing to my new house.

@r34 gtr and Gabby - They were rewinds but i sold them all to a guy with an 86. They looked decent on from but back..not so hot. lol (See below)



I ordered a CS 255lph Pump today. One more thing off the list