my clutch is slipping again need help

[mr_tire_fire]

this is the third clutch i had put in and it still won't grab jusst spins when i get into boost i have a xtd stage 4 clutch thats supposed to take 463tq will this get better i heard some slip and then hook up good later please help i am low on cash and want to drive my car

[silverarrow27]

I have an XTD stage 3 and never have an issue with it. Are you breaking the clutch correctly and patiently?

What were the brands of your previous clutches?

[IDriveFords]

Yea you need to *****-foot it for about 1k miles be4 it's properly broken in. If you immediatly start slipping and dropping it your gonna get uneven clutch wear and its gonna start slipping. Are you sure you have your clutch pedal bled and adjusted right?

[mr_tire_fire]

yes i think i got on it before it was broken in is there any way to fix this? thanks brad

[mr_tire_fire]

bump

[goj_cloud]

resurface it, is tehree a way to resurface clutches

[Blown240sx]

Youll need to resurface the flywheel and hopefully the pressure plate is ok. Once you do those the clutch should grab but I would baby it for a while.

[mr_tire_fire]

I resurfaced it and it grabs ok but how many rpms before i shift so i don't screw it up again i was going to shift at 3200 and put a thousand miles on it how do i know when i can beat on it? also I'm going to weld my diff but this will be a street car it will just squeal around corners or am i going to power through it if you know what i mean thanks

[NismoJame]

What kind of power u put down ?

[mr_tire_fire]

I am new to this but right around 234-245 whp maybe i have t25,3 inch downpipe all the way to muffler(no cat) fmic , hard intake piping,kn filter, boost is set at 12.5 to 13 pounds i dont know if i'm right on with hp figures i know i can smoke my girlfriend 2001 acura cl type s with 260hp 3.2 by two cars. thanks

[Blown240sx]

just baby the clutch for 400 miles or so more if you want. The best driving for breaking in a clutch is stop in go due to the clutch having to disengage and reengage. Highway driving is not good clutch break in driving. Once the 400 or so miles is done just put it in like 3rd and punch it and see if holds all the way through the rpm band.

[Morph]

Why are you shifting so high 2.5k should be high enough.

[mr_tire_fire]

yeah i will try that 2500 i'll just shift sooner too i'm working on it tommarow then i will baby it thanks