my car wont start!! help

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

i recently replaced the head on the car cuz it was warped....i set everything to TDC, i have the cams facing away from each other, the distibutor is close but not perfect, i put like 5 gallons of 87 octane in, if it matters, and it wont start....i have spark to all 4 plugs, and i have compression and fuel....

idk why it wont fire...help please, my project is almost done


GTR_Future
Posts: 16
Joined: Fri Apr 20, 2007 4:04 am
Car: GTR

Post

did you try jumping it ?

User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

yea i have a battery charger/ jumper....and it turns over fine it just wont start

User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

bump

User avatar
plane16j
Posts: 374
Joined: Fri Sep 15, 2006 10:48 pm
Car: 91 nissan 240sx

Post

try priming it by poring alil gas in the t-body...and see if it will fire up...that will tell you alot.

User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

take the intake off and put gas in the throttle body? or what?

User avatar
plane16j
Posts: 374
Joined: Fri Sep 15, 2006 10:48 pm
Car: 91 nissan 240sx

Post

yes ...or you can put it through the point in the intake where the hose from the valve cover goes into it .

User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

bump

User avatar
niemczykj
Posts: 995
Joined: Sun Nov 26, 2006 7:09 pm
Car: 1992 240sx fastback, 1986 Z31 Turbo

Post

BUMPPPP


Return to “240SX Technical Forum”