My Car 0-118mph

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

Excuse the crappy launch.

http://rap.midco.net/jprosper/0-118mph.wmv

Post by **Q45RaCiNg_JR** » Wed Apr 07, 2004 2:15 pm

Link doesn't Work

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

Nevermind then, I don't have anyone to host my vid.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

I got it now

http://rap.midco.net/jprosper/0-118mph.wmv

Post by **Touchdown038** » Wed Apr 07, 2004 2:15 pm

I like it man... sounds real nice.

Post by **[Zero-S]** » Wed Apr 07, 2004 2:15 pm

Nice.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

Thanks guys. As you could see the speed limiter comes up real fast, I need a remedy.

Post by **AGPSuperstaR** » Wed Apr 07, 2004 2:15 pm

nice....and dyno numbers? quarter mile times? what does that PE kit consist of? keep it up homie...Alex

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

Saving up for dyno time. No quarter mile track in a 340 mile circumference. There is an 1/8 mi. and I'll post some numbers and vids as soon as I go. The kit is basically the turbocharger, a rubber hose, and gaskets. Thanks man. I was going to take another vid today but the battery died.

Post by **l2andom** » Wed Apr 07, 2004 2:15 pm

damn nice, lovin the sound of it

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

Thanks man, I want to take another vid of just quarter throttle and half throttle driving so you guys could hear this turbo spool up. It's pretty damn sick. I get a hard on everytime.

Post by **240sxGT** » Wed Apr 07, 2004 2:15 pm

Realy great man, keep up the good work.

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

You did realize you were overheating right?

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

nice vid though. I'm looking forward to more.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

It's funny you mention that. I've always had that so called "over-heating" problem. It has done that ever since the SR was installed. I have no idea how to fix it.

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

maybe its just the gauge that doesent work properly with the SR?

I have never heard of that though. Maybe your thermostat is ****ed. Does it go up to that temp when idling?

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

No not when Idling, if you notice the gauge is high when I started the run, then the it starts to get alot higher through the run.

Post by **dareo** » Wed Apr 07, 2004 2:15 pm

nice video man, car looks pretty quick. Can't wait till i can swap.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

It'll be worth it when you do, be sure to let us know when you do. You'll fall in love all over again. Thanks man.

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

You should get it checked out. It would be such a waste to cripple that motor. I wouldnt even be running it until I figured it out.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

it's been 7 months now. I posted the problem back when I first got it in and there have been many with the same problem as me. They say it's normal.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

http://www.nissaninfiniticlub....ating

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

never hurts to get an aftermarket gauge!

what sorta setup are you running? stock?

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

95 240SXRedtop, PE 1820 Kit, OBX Tubular Manifold,Trust Z32 MAF Intake Kit, V-SPL FMIC,Type-S BOV, 02 Housing and 3" DP.Walbro FP, Koyo Radiator,Dual 12" Flex-a-lite Fans,Fidanza Flywheel,Spec Stage 2 Clutch

Post by **MikeMurphy** » Wed Apr 07, 2004 2:15 pm

whats included in the 1820 kit? I looked it up and it looks like a z32 kit.

Post by **DriftS14** » Wed Apr 07, 2004 2:15 pm

http://shop.store.yahoo.com/ph....htmlThis is where I got it from.

My Car 0-118mph

My Car 0-118mph

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums