my 5-speed q45 video

[subtle_driver]

hey, i haven't been here in a while. busy getting married.

here is a video of my next project.

https://www.youtube.com/watch?v=31Fl5sRvS84

converting to flex fuel like my last q45, and looking for info on a supercharger side mount bracket. I want to restore it and get it fully functional with interior and take it to autocross and drift events and its my back-up car for driving to work.

im working on making urethane engine mounts and looking for a skid plate i can buy and install.

does anyone have experience with installing an aftermarket lsd into the stock diff? thanks!!!! enjoy.

[black g50]

[Q451990]

Looks like fun!

[Brew Q]

Love the way it sounds! Is that full exhaust? n/m I found an old thread - you said, 2.5" with a crossover.

Still running E85? What'd you have to change besides injectors? fuel lines etc.?

[subtle_driver]

This is a newer car I picked up. The exhaust is custom header back 2.5 dual with flowmasters and turn downs befire the axles. I didn't change anything on e85 at first. I ran phase one, then phase 2 and tuned tje ecu. I installed a walbro 255lph and 850cc injectors later with retune. Tje stock injectors could flow enough, but were not compatable with e85.

[elwesso]

Looks sweet. SO you got a 94 and converted that to 5-speed?? Nice! That car looks pretty clean!!!

Put about 75k miles on my 5-speed Q so far since i did the swap..

[subtle_driver]

did you make adaptor plates at one point? if you still do i might be interested or send you some business soon. ive put about that on my previous 5-speed 1990, but then i cavitated the oil pump from continuous 8k rpm burnouts. i had to do a second 30 second burnout because the idiot didn;t know what he was doing. (i was helping a drag strip make videos to promote, to keep kids from killing people street racing in traffic and go to the drag strip instead.)

your close, my car is a 1995. its far from clean. its good from far, but far from good. i need to fix the blend door servo, its locked up.... not sure whats causing it. the motor works but maybe the board is bad.

anyways,,,, does anyone have info on how to make a supercharger bracket?

[Zer0_KooL]

That Q was so much fun to ride in!! Hey if your interested, BENRYS on V8nissans is selling his old top mount M122 Supercharger manifold

http://www.v8nissans.com/forums/showthr ... r-manifold

[subtle_driver]

thanks for the link. looks interesting. but i am looking to not cut the hood, i want a sleeper look.

[elwesso]

did you make adaptor plates at one point? if you still do i might be interested or send you some business soon. ive put about that on my previous 5-speed 1990, but then i cavitated the oil pump from continuous 8k rpm burnouts. i had to do a second 30 second burnout because the idiot didn;t know what he was doing. (i was helping a drag strip make videos to promote, to keep kids from killing people street racing in traffic and go to the drag strip instead.)

your close, my car is a 1995. its far from clean. its good from far, but far from good. i need to fix the blend door servo, its locked up.... not sure whats causing it. the motor works but maybe the board is bad.

anyways,,,, does anyone have info on how to make a supercharger bracket?

Yea I did, I've sold about 30 of them so far over the last couple years. I sell the complete kit for $300 but if you wanted to buy a few at a time I'll cut you a deal. Send me an email!

[subtle_driver]

Ill send people to you.

[HG50]

sweet q man. you have any interior pics of the shifter? if so post some up