my 1990 ka24e is having problems starting..advice? solution?

[martins_240sx]

it started when i changed my spark plugs and wires, fuel filter, cap and rotor, and clutch. since then i have changed my spark plugs from bosch to njk...and the stock wires to 9mm...i have pulled the cap and rotor to make sure they are on right..the clutch is a stage three brand new "action" clutch. it never did it before these things were changed. i have no idea what it could be...hopeully ill be doing an sr swap in febuary.

[rogoman]

Does it start at all? If not, the ignition wiring firing order may be incorrect.

[Mr HuSTLeR]

Check ur wiring for your plugs.

[martins_240sx]

yes it starts...it runs perfectly...it just doesnt start up very well

[martins_240sx]

all the wiring to the plugs have been checked and changed and the problem still accures

[rogoman]

Have you checked the ignition timing?

[martins_240sx]

no i dont know how. i did use a timing light but i didnt know what the hell i was doing with it.