MSD Injectors
MSD Injectors
I got a pair of MSD 72LB/HR injectors Part#2014. I wanted to know if anyone has used these before, if there is any modification need to have them fit the fuel rail. Any insight would be greatly appreciated. Thanks
-
epokh
- Posts: 292
- Joined: Thu Jun 02, 2005 9:37 pm
- Car: 92 240 HB
92 240 Coupe
02 Sentra - Location: SW Mo.
Re: MSD Injectors (tigwebu)
I'm too lazy to look up the part number, but if they're top feed, you'll need a top feed rail, and if they're high impedence, you'll need a resistor box. AMS(Turbo240) sells a nice resistor box and has install write up on their site.http://www.turbo240.com
-
klattr1
- Posts: 1130
- Joined: Sat Sep 28, 2002 1:18 pm
- Car: GT42R powered S14/KA
- Location: Charlotte, NC
- Contact:
Re: MSD Injectors (tigwebu)
you'll need more than a pair. loltigwebu wrote:I got a pair of MSD 72LB/HR injectors Part#2014. I wanted to know if anyone has used these before, if there is any modification need to have them fit the fuel rail. Any insight would be greatly appreciated. Thanks
-
WDRacing
- Moderator
- Posts: 15983
- Joined: Mon Nov 25, 2002 2:00 am
- Car: 95 240SX, 99 BMW 540i, 01 Chevy Express, 14 Ford Escape
- Location: MFFO
- Contact:
Re: MSD Injectors (klattr1)
You d!ck, I was totally going to say thatklattr1 wrote:you'll need more than a pair. lol
-
hannibal
- Posts: 9680
- Joined: Wed Sep 11, 2002 2:38 am
- Car: Red Line to Glenmont
- Location: Washington DC
Re: (tigwebu)
Side feed MSD's?!? Never heard of 'em.
I did read something on MSD's site that said your injectors are 4/1 peak and hold, meaning 4 amps to open and 1 amp to keep them open. Not sure what 'normal' low impedence injectors are, but something to think about when buying resistors.http://www.msdignition.com/fuel_3.htm
I did read something on MSD's site that said your injectors are 4/1 peak and hold, meaning 4 amps to open and 1 amp to keep them open. Not sure what 'normal' low impedence injectors are, but something to think about when buying resistors.http://www.msdignition.com/fuel_3.htm
Re: (WDRacing)
Yeah i got them used/ but still in the orginal package for a steal of a price. I notice that there topfeed after google for the past 6 hours. Thanks for the helpWDRacing wrote:MSD doesn't make side feed injectors. Did you buy them used? If you bought them new, you should have purchased the ones that are the correct impedance.
WD