Motor is in

[Yellow4g63]

I got the mounts Tuesday and me and my friend droped the motor in Friday night. Pain in the *** when you do it from the top with just a chain to adjust the motor. anyways it's in



Next time I'll go from the bottom like I do with the FWD nissans. Yeah it's dirty bfd.

[NISMO_RB25]

What mounts are you using? Yea it is a tight fit isn't it. I thought for sure I would crush something important

[Yellow4g63]

It's the TopHat mount kit.

[NISMO_RB25]

looks good! Did you get it wired up.

[Project240]

Yeh, after dropping mine in from above I was wishing I had raised it in from below....

[Andrew85cm]

Yeah mine looks very similar to that. I used Cameron's mounts. I just got it installed before I went to the beach. My camera ran out of batteries so I wasn't able to take pictures. I put the motor in seprate from the transmission. I am having some problems cause my shifter stick is attached to the transmission still and I can't get it in with it in there. How did you remove yours or how do you? I need to get it out tonight.~ANDREW~

[NISMO_RB25]

pull the dust boot off, and use a pair of snap ring pliers to remove the ring. then it just lifts out. put it back in the same way.

[Andrew85cm]

Thanks a ton. I just read that about the sr 2 minutes ago as I was searching another forum for the answer. I never really got a good look at it. I was wondering how you people installed it with the shifter.~ANDREW~

[S13Sil-line]

Everybody I know that did it took it off. It's just a pain to do it with it in. One more thing you have to aim for.

[Wulfgang]

If you put it in from the bottom (engine + transmission), you can leave the shifter in. I did, and had no problems.

[Yellow4g63]

looks good! Did you get it wired up.

No I will later this week if I'm not too tired after work like I am right now.

[sil820]

good job andy.. wish u the best of luck with it

[93RPS13]

nice!!!! so thats a rb20 right, and does the hood closes without cutting the bracing? Thanks

also can you do a write up on the wiring and take pics of it? Thanks

[xjon]

Good job Yellow. Get it running and on the streets. I am waiting to get wasted by a rb 240. I got wasted by an sr one time and I loved it!

[Yellow4g63]

nice!!!! so thats a rb20 right, and does the hood closes without cutting the bracing? Thanks

also can you do a write up on the wiring and take pics of it? Thanks

Yes I didn't have to cut anything on the hood for it to close.

[crxcess]

heh, show off! nice color 240 tho!

[Yellow4g63]

Haha no it's not a nice color, you should see the rest of the car. It looks like I tried to paint it myself . The guy I bought it from tried to paint it himself.

[crxcess]

hey if you dont hurry up and wire that thing I may end up 3 and 0! haha im possibly going to do a rb25 in the near future.

[Yellow4g63]

Haha I started after work today but I couldn't find my iron and shrink rap. So Saturday it will purr.