morels in j30

[diamondj30]

if you got a j and dont want kicks,this is what i did,nothing on the floor.5 out of 5 imaging,everytime.i moved both computors,sealed the area and there are 2 1inch holes that vent into the subframe body of the car.

[diamondj30]

this also frees up your door for midbass.

[Simmsled]

Beautiful.

[diamondj30]

thanks simm,took me and a buddy,30 man hours just to get the mids angled to image proprly.got to have a person in both seats to set up.just like 2 judges.i float one set of tweets on backstrap over them,angled to perfection..pillar tweets 10k and up.really helps bring the side s of the stage up.

[Simmsled]

yah, the fabrication takes time but the real work is in the tuning. Kudos!

[diamond]

you got that right simm.ussaully after all said and done.i only have to move 3 bands out of 30.

[NY94J30]

What size are those mids? Those arent the 7inch Chameleons, are they?

[diamond]

6 inch morels,ny.very smooth speaker.can take power too,low fs.i run them 127 hertz to 2800 or so.

[NY94J30]

Im talking about the second picture - those arent Image Dynamic Chameleons?

How many watts are you feeding the Morels?

[diamond]

oh,my bad,those are 8" image dynamics.for midbass.use very low airspace.i added to the airspace to.just dont have pic.when shes all done this time the morels will get 270 watts apiece from custom made zapcos c2k 6.0.---the tweets will get 270 apiece too.i will run 1080 watts to the 4 mbquart q twweets alone.my new plans call for 7000 watts with no bridging of amps.80 pounds of power.

[diamond]

happy dayfinlly after almost a year i got my alpine hda 5460 hard disk player.now to get that pxah701 prossesor and im in bussiness again.would haver went with the pioneer p9 combo,but there midbass setting on the top only lets you play down to 250 hrtz or so,way to high for me.i never paly midbass any higher than 120 hertz.cant handle the extra octive.

[diamond]

tommorro i pick up a alpine9835,movin along

[ayjay]

i don't understand why the p9 wouldn't work for you, it has high/mid/low/sub... the "low" would be what you'd use for your 6.5's cause i think it ranges from 80hz-250hz. i'm confused

[diamond]

ive got a couple competetor friends that have them,doesnt work for me...i would use that for the midbass.you can only go down to 250,the top end starts there on the chanel i would use.i run my midbass between.40low,100 high.when not in the lanes i played loud so i would cross the midbass 50- 200....i cant compete buti still would like the option for the car.they are great units,alot better than the odr i think.dont get me wrong ajau,nice ****,lol.