More Trouble Trying to get my swap to run

[newdude1]

K so I tested for boost leaks and everything and found two. Fixed them....and its still doing the same thing. With the maf plug in I cant rev past 1k. And sounds horrible running, It isnt smooth at all. Also it wont idle.

Now with it the maf unplug it revs a little bit but no past 2 and the car sounds horrible still. But it will hold a idle below 500. Can my maf be bad and cause this? Or something else?

This is really getting to me. I put so much money into this and I cant get it to run. Again I really appreciate any help.

[thrasherx89]

ummmm...damn thats pretty bad

have you checked for ignition and cam timing yet?

[ashibah83]

are you running a pull-through or blow-through setup?....we kinda need more info, BUT it sounds like your MAF is bad

i would also check the timing, just as a precaution

[HoosierSX]

its a maf issue, just make sure you have all the right wiring and a good ground connection!

stock maf or?

are you using an safc?