More SAFC II wiring questions - already searched :)

[onosqv]

Car: 89 240sx automatic ka24e

Ok, The first thing is am I suppose to wire the a/f ECU wire to the Yellow & White wires or the Pink & Orange wires.

I currently have it wired to the yellow and white as in the instruction booklet.

I red that Pink & Orange is for Mass-Airflow and Yellow & White is for Speed Density?

If so, should I be wiring to pink & orange? which side to ecu, which wire to safc?

Second, the sensor type should be Hot-wire correct?

Third, is there a factory knock sensor wire to tap into?

Fourth, is there a Pressure sensor wire?

Lastly, is there any tuning guide for the safc that I can follow?

Thanks!!!
Modified by brokeAs240sx at 6:19 PM 9/29/2004

[skatanic28]

you should be using the yellow and white. it should say in the book that those are the wires for a hot-wire sensor. i dont remember which goes to which but it says it in the booklet. no pressure sensor.

[onosqv]

Thanks, just wanted to make sure because I was reading a "How to tune SAFC article" and it confused me.