Missing engine harness from the host car! Suggestions?

[kpnitrl]

So, I finally figured out what I was missing in my wiring and why I couldn't figure out the power side. (It may sound stupid but...) Turns out that the previous owner took the wiring harness with him when he pulled the stock SR. Oh, I almost forgot to mention, Im working with a JDM S13 shell, and installing an RB25DET

But now I'm not sure what to do with the wires that I need to run from the RB ECU to the SR engine harness, (pic below)

I guess my main question is that since they are both RHD would I be able to just run the entire RB engine harness and just tap into the S13 dash harness for power?

[S13 240SX]

yeah you tap the RB harness into 1, 240sx dash plug whtie or brown and plus the 2 KA chassie plugs near the passanger feinder.

[ninety1two40]

Here's some info on the chassis power connections:http://www.racebread.com/old/Documents/harness.swf

You'll need flash to play it.

[kpnitrl]

awesome! thanks for the help guys