Midway Parts Team.com October Special

Post by **gabossie** » Sun Oct 17, 2004 8:13 pm

Hey Dan, just sent you my order for the differential bolts, spark plugs, cap, and rotor. Thanks.

Post by **MidwayParts** » Sun Oct 17, 2004 8:44 pm

gabossie wrote:Hey Dan, just sent you my order for the differential bolts, spark plugs, cap, and rotor. Thanks.

I gots. Thanks bunches. Hat on way.

Post by **gabossie** » Sun Oct 17, 2004 8:53 pm

Sweet, what color you givin me?

Post by **MidwayParts** » Sun Oct 17, 2004 9:15 pm

How bout.....dark green?

Post by **gabossie** » Mon Oct 18, 2004 6:29 am

Sure. I'd take a dark blue if you have any left, or one of the white/cream colored ones. Anything will work really. THANKS

Post by **MidwayParts** » Mon Oct 18, 2004 8:00 am

gabossie wrote:Sure. I'd take a dark blue if you have any left, or one of the white/cream colored ones. Anything will work really. THANKS

Dont have any dark blue left, but I have the tan and the white.

Post by **kane2g** » Tue Oct 19, 2004 12:04 am

how about the S14 ball joints for the front.and Z32 turbo gaskets.4 and 5 bolt onesthanks

EDIT> And how about some DarkGreen hat to match my Nissan

Post by **okis14** » Tue Oct 19, 2004 5:07 am

Do you sell the fuel sock only for a S14?

Post by **MidwayParts** » Tue Oct 19, 2004 5:47 am

kane2g wrote:how about the S14 ball joints for the front.and Z32 turbo gaskets.4 and 5 bolt onesthanks

EDIT> And how about some DarkGreen hat to match my Nissan

The ball joint comes with the arm. Sorry. Its here:http://www.trademotion.com/par...gid=1

The turbo gaskets are $11 and $13 each and there are four (two each). Those are not on the online catalog but you can order them in the comment area of the order.

One more dark green...... I'll hold it for you today.

Post by **MidwayParts** » Tue Oct 19, 2004 5:50 am

okis14 wrote:Do you sell the fuel sock only for a S14?

Here is that strainer:http://www.trademotion.com/par...gid=1

Thanks, and let me know if I can help anymore.

Post by **kane2g** » Tue Oct 19, 2004 11:35 am

dantech wrote:The ball joint comes with the arm. Sorry. Its here:http://www.trademotion.com/par...gid=1

The turbo gaskets are $11 and $13 each and there are four (two each). Those are not on the online catalog but you can order them in the comment area of the order.

One more dark green...... I'll hold it for you today.

Sux about the balljoints, cant afford the whole LCA.I know I will be taking one of each gaskets.But since I need to spend more $$ to get my hat.....How much is the KA dust collar on the rear of the trans?? I also will take a quick look at my 5lug swap, see if there any parts that I neef for that..... and will place the order tommorow, so plz hold the hat for 1 more day. thanks

Post by **MidwayParts** » Tue Oct 19, 2004 1:23 pm

kane2g wrote:Sux about the balljoints, cant afford the whole LCA.I know I will be taking one of each gaskets.But since I need to spend more $$ to get my hat.....How much is the KA dust collar on the rear of the trans?? I also will take a quick look at my 5lug swap, see if there any parts that I neef for that..... and will place the order tommorow, so plz hold the hat for 1 more day. thanks

The rear dust cover seal is $8.26

Post by **kane2g** » Tue Oct 19, 2004 8:02 pm

bingo thats over $30

32135 Dust cover14415 4bolt turbo gasket14445 5bolt turbo gasketthose the nubmers but none are in catalog, so I just gonna call ya!

Post by **MidwayParts** » Wed Oct 20, 2004 6:08 am

kane2g wrote:bingo thats over $30

32135 Dust cover14415 4bolt turbo gasket14445 5bolt turbo gasketthose the nubmers but none are in catalog, so I just gonna call ya!

Post by **Doomed2Walk** » Wed Oct 20, 2004 8:38 am

You don't happen to have the Nismo metal head gasket do you? Price?

Post by **MidwayParts** » Wed Oct 20, 2004 11:36 am

Doomed2Walk wrote:You don't happen to have the Nismo metal head gasket do you? Price?

I dont have but can order that. Its about $225It has a 87mm bore and a compression thickness of 0.5mm. The catalog says its only for the rear wheel drive Silvia.

Post by **JedC** » Wed Oct 20, 2004 6:52 pm

How about the egr block off that goes in the exhaust manifold for a 93 240sx? Also anything else you'd recommend for removing egr, aiv, or emissions.

Post by **kane2g** » Wed Oct 20, 2004 8:43 pm

Dan, thanks for putting the order through.It also looks like I am going to be in a market for a pair of part# 40200-0V010but thats after I get the next check........ unless you want to donate them JKunless you can?If not, JKhehehe

Post by **MidwayParts** » Thu Oct 21, 2004 5:49 am

JedC wrote:How about the egr block off that goes in the exhaust manifold for a 93 240sx? Also anything else you'd recommend for removing egr, aiv, or emissions.

The EGR passage number is 14711-40F00 and the gasket for that is 14720-40F01. Just type those in here:http://www.trademotion.com/par...gid=0

It looks like all you will need are these two parts but you may want to ask Nistech in the mechanics forum if he knows of anything else you might need. Thanks and let me know if I can help anymore.

Post by **MidwayParts** » Thu Oct 21, 2004 5:52 am

kane2g wrote:Dan, thanks for putting the order through.It also looks like I am going to be in a market for a pair of part# 40200-0V010

I have a pretty good price on those:

Post by **Doomed2Walk** » Thu Oct 21, 2004 6:33 am

How much for a S14 SR throw-out bearing?Errr KA/SR internals the same? Need a stronger or maybe just new T/O bearing

Post by **MidwayParts** » Thu Oct 21, 2004 6:47 am

Doomed2Walk wrote:How much for a S14 SR throw-out bearing?Errr KA/SR internals the same? Need a stronger or maybe just new T/O bearing

The bearing is here:http://www.trademotion.com/par...gid=1

ka/st internals are not the same number but they may work together. You will want to find someone who has switched them before to see how well that works. I would trust the original one for your vehicle.

Post by **JedC** » Thu Oct 21, 2004 7:44 am

Dan, I found the screw in plug that goes in the exhaust manifold. I don't see a manifold in the picture you put up. I searched on this topic and found the part # 14052-21R00. I believe that is the right one I need. If I read another thread right, I will also have to plug the hole coming off the block into the manifold. So the parts you listed earlier are an egr block off plate and the gasket for it? Thanks.
Modified by JedC at 12:55 PM 10/21/2004

Post by **MidwayParts** » Thu Oct 21, 2004 8:07 am

JedC wrote:Dan, I found the screw in plug that goes in the exhaust manifold. I don't see a manifold in the picture you put up. I searched on this topic and found the part # 14052-21R00. I believe that is the right one I need. If I read another thread right, I will also have to plug the hole coming off the block into the manifold. So the parts you listed earlier are an egr block off plate and the gasket for it? Thanks.

Modified by JedC at 12:55 PM 10/21/2004

Do you have a dual exhaust? Here are some more pics. Are you just trying to block off the EGR or are you looking to replace a certain part? I dont find that number listed for your vehicle but it may be one of the things you need.

Modified by dantech at 3:09 PM 10/21/2004

Post by **Doomed2Walk** » Thu Oct 21, 2004 11:44 am

Oh one more thing, I don't know what it's called, but I need the cover for the door handle on the inside (driver's side)

Post by **MidwayParts** » Thu Oct 21, 2004 12:31 pm

Doomed2Walk wrote:Oh one more thing, I don't know what it's called, but I need the cover for the door handle on the inside (driver's side)

It just makes a difference if its black or blue. Here's the link:http://www.trademotion.com/par...gid=2

Post by **Doomed2Walk** » Thu Oct 21, 2004 2:15 pm

Black, also ashtray for the 95. I'm trying real hard to buy stuff to replace on my budget just to get that hat ;[

Post by **MidwayParts** » Thu Oct 21, 2004 2:49 pm

Doomed2Walk wrote:Black, also ashtray for the 95. I'm trying real hard to buy stuff to replace on my budget just to get that hat ;[

This would definetly do that, by itself. Here you go:

http://www.trademotion.com/par...gid=2

Post by **JedC** » Thu Oct 21, 2004 4:58 pm

Hey Dan,do you have any pics of the exhaust pipe right after the manifold? I went and looked at my engine today and this is where the egr hardpipe runs to. I have some questions about the parts you listed earlier, EGR passage #14711-40F00 and gasket #14720-40F01. Are these just replacement parts that I would already have, or are they specificially made to block off the egr passage? Any info on this would be great. I'm trying to get my swap done and having some trouble on this.

Post by **MidwayParts** » Fri Oct 22, 2004 4:13 am

JedC wrote:Hey Dan,do you have any pics of the exhaust pipe right after the manifold? I went and looked at my engine today and this is where the egr hardpipe runs to. I have some questions about the parts you listed earlier, EGR passage #14711-40F00 and gasket #14720-40F01. Are these just replacement parts that I would already have, or are they specificially made to block off the egr passage? Any info on this would be great. I'm trying to get my swap done and having some trouble on this.

All of the parts Ive listed are OEM factory parts that originally came with your vehicle. What is it you are trying to do? The passage is what the EGR bolts to. I took a look in my inventory and I dont see anything like a plate to block off the EGR. I asked a mechanic in my shop and he said he's heard of that being done but thinks it probably aftermarket. Heres that pic:

Midway Parts Team.com October Special

Re: (gabossie)

Re: (gabossie)

Re: (gabossie)

Re: (kane2g)

Re: (okis14)

Re: (dantech)

Re: (kane2g)

Re: (kane2g)

Re: (Doomed2Walk)

Re: (dantech)

Re: (JedC)

Re: (kane2g)

Re: (Doomed2Walk)

Re: (dantech)

Re: (JedC)

Re: (Doomed2Walk)

Re: (Doomed2Walk)

Re: (dantech)

Re: (JedC)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums