Dan, that's awesome. You'll be getting my order for Nismo stuff sometime soon. That hat is mine!!! ha ha ha

brokeAs240sx wrote:
Thanks a lot. I'm thinking of the 60mm one. But I would also like the part # of the OEM studs (depends on which set of wheels I'll be getting in the next week or so). I tried looking on different web sites & just got confused w/ all the different part #'s for all the studs. I'll leave it to the expert to tell me which one is right .

Thanks again!

The rear for the 300Z are part number 43222-50J00

The fronts for the 240SX are 43222-35F00

The Nismo ones list for "solid rear axle" and "without solid rear axle". Do you know which of those you would need?

dantech wrote:The rear for the 300Z are part number 43222-50J00

The fronts for the 240SX are 43222-35F00

The Nismo ones list for "solid rear axle" and "without solid rear axle". Do you know which of those you would need?

That was another thing I was wondering about. All I know is that my rear hub is from a 92 NA 300zx. I will be putting on an 89 240sx. Hope that helps?

brokeAs240sx wrote:
That was another thing I was wondering about. All I know is that my rear hub is from a 92 NA 300zx. I will be putting on an 89 240sx. Hope that helps?

Are you changing the front or the back?

dantech wrote:Are you changing the front or the back?

Sorry if I was unclear.

I have the following:

Front: Attain/GTO hub (told it has same thread/knurl as oem 240sx, except they are 5 lug)Rear: 300zx 92 N/A

I plan on changing out all my studs to the longer 60mm version. In the worse case, I will just do the rear 300zx oem studs.

dantech wrote:The rear for the 300Z are part number 43222-50J00

The fronts for the 240SX are 43222-35F00

Are those the oem part #'s?

Thanks again for all your help.

hey dan, I need a piece that goes between a trans mount and a downpipe.L shaped.Can you bring up a pic?Oh its a 92 240sx manual

Hey Dan, can't get those Nismo bushing part numbers to work on the website. I'll be calling in a few days to place my order, but wanted to bring that to your attention for now.

brokeAs240sx wrote:
Sorry if I was unclear.

I have the following:

Front: Attain/GTO hub (told it has same thread/knurl as oem 240sx, except they are 5 lug)Rear: 300zx 92 N/A

I plan on changing out all my studs to the longer 60mm version. In the worse case, I will just do the rear 300zx oem studs.

Are those the oem part #'s?

Thanks again for all your help.

Those part numbers I gave you are the factory number for the two applications. The Nismo bolts are 10 studs per kit and are $52.20. The catalog mentions that they only fit the fronts on the 240 and the 300. Id go with the non solid rear axle application which is Nismo number 40222-RS045.

kane2g wrote:hey dan, I need a piece that goes between a trans mount and a downpipe.L shaped.Can you bring up a pic?Oh its a 92 240sx manual

I think the one your looking for is this highlighted one. Its about $34 and is part number 20712-19V00. You can do a number search for that here: http://www.trademotion.com/par...gid=0

180fan wrote:Hey Dan, can't get those Nismo bushing part numbers to work on the website. I'll be calling in a few days to place my order, but wanted to bring that to your attention for now.

Okay, Ive got those bushings listed on my catalogs by the OEM number now. Thanks.

dantech wrote:Those part numbers I gave you are the factory number for the two applications. The Nismo bolts are 10 studs per kit and are $52.20. The catalog mentions that they only fit the fronts on the 240 and the 300. Id go with the non solid rear axle application which is Nismo number 40222-RS045.

Thanks a lot, great price on those. And just to be absolutely sure before placing my order, when you said "and the 300", you meant the 300 rear yes?

brokeAs240sx wrote:
Thanks a lot, great price on those. And just to be absolutely sure before placing my order, when you said "and the 300", you meant the 300 rear yes?

Yes, the 300 rear.

dantech wrote:I think the one your looking for is this highlighted one. http://www.trademotion.com/par...gid=0

20621 is the one I need.

kane2g wrote:20621 is the one I need.

Thats a part number 20610-52F00 and you can do a number search at the same link. Thanks

Dan i placed my order but never heard anything about it. I got the auto tranny pan for the 240sx.. any idea? Email: [email protected]

nab911 wrote:Dan i placed my order but never heard anything about it. I got the auto tranny pan for the 240sx.. any idea? Email: [email protected]

Dantech how much for motor mounts for 89 fastback shipped to 91766 CA?

SlideAddictionRPS13 wrote:Dantech how much for motor mounts for 89 fastback shipped to 91766 CA?

Here is a link to those mounts:http://www.trademotion.com/par...gid=1

It would be about $15 in shipping to you. Let me know if I can help with the order. Thanks.

Dan, how much for shipping on 4 of those power braces for s13 to zip code 94121? I'm getting local guys in on a buy now. lol

180fan wrote:Dan, how much for shipping on 4 of those power braces for s13 to zip code 94121? I'm getting local guys in on a buy now. lol

Its like $12 or $14 each kit. Im not sure about the dimensions of the box they are gonna come in but I can speculate on that shipping.

Thanks Dan, just got my 02 and the hats

As always, great deals.Too bad I'm so broke, but I will be getting the braces sooner or later.

kane2g wrote:Thanks Dan, just got my 02 and the hats

As always, great deals.Too bad I'm so broke, but I will be getting the braces sooner or later.

Hey Dan, how soon will you be getting them in? I need 4 and still need to know the shipping on them total.

thanks again man

180fan wrote:Hey Dan, how soon will you be getting them in? I need 4 and still need to know the shipping on them total.

thanks again man

The time will depend on two things: 1. When you order them and 2. When Nissan Motosports ships them to me. If you put the order in today, I'll call Motorsports and get them ordered. Yesterday, Motorsports told me they are short handed right now and shipping from them has been taking a week and a half. Then once I get them, Id probably be two or three days to you. As I see it total, about two weeks.

The shipping for 4 of them will be $51.52

Hey Dan, I need some serious help here! I'm trying to swap to 5 lug front hubs from an s14 non-abs 240sx (95-98). I tried searching your site but couldn't find what I need. Here are the parts I need. Can you give me the part numbers/ a price quote for each?

1 front 5 lug s14 SE hub (non-abs)

2 front hub locking nuts and washers and pins (all the parts that secure the hub to the spindle) for a 95 240sx SE

2 sets of front spindle bolts (the hardware that ties into the LCA, tension rod, etc.) for a 95 240sx SE

Both front tension rod bushings for an s13 240sx SE 1993 non-abs.

Thanks!

kouki-gymkhana wrote:Hey Dan, I need some serious help here! I'm trying to swap to 5 lug front hubs from an s14 non-abs 240sx (95-98). I tried searching your site but couldn't find what I need. Here are the parts I need. Can you give me the part numbers/ a price quote for each?

1 front 5 lug s14 SE hub (non-abs)

2 front hub locking nuts and washers and pins (all the parts that secure the hub to the spindle) for a 95 240sx SE

2 sets of front spindle bolts (the hardware that ties into the LCA, tension rod, etc.) for a 95 240sx SE

Both front tension rod bushings for an s13 240sx SE 1993 non-abs.

Thanks!

Here is where you will find the hubs listed:http://www.trademotion.com/par...gid=1

The hub nuts are number 01225-00591 and the washers are 40264-0P001. I dont have a listing for the cotter pin. They are pretty standard though.

Im not sure which bolts for the spindle you needed so I attached a pic.

The front tension rod bushing comes with the rod on the S13. Here is a link to that:http://www.trademotion.com/par...gid=1

Let me know if I can help anymore.

Hi,

Looking for the sunroof latch assembly for a '91 240sx with the manual sunroof and HICAS.

Please post a diagram so I can see what I need.

Thanks,Nate

NateDogg wrote:Hi,

Looking for the sunroof latch assembly for a '91 240sx with the manual sunroof and HICAS.

Please post a diagram so I can see what I need.

Thanks,Nate

Well looks like my online catalogs have a pretty good pic of the handle. Let me know if you need a more descriptive pic. Thanks and here you go:http://www.trademotion.com/par...gid=2

how much for a 1991 dohc crank pulley bolt shipped to 35643? thanks

bassman31386 wrote:how much for a 1991 dohc crank pulley bolt shipped to 35643? thanks

Its about $8 and its part number 12309-29S00.

You can do a search for that number here:http://www.trademotion.com/par...gid=0

Let me know if I can help anymore. Thanks