Midpipe for the 2.5's

[D-Roll]

Previously I owned the Megan midpipe on my 02 SpecV, so I decided to email tunerpros.com and ask them if they will design an aftermarket midpipe for the 2.5's. After finally looking at the stock midpipe on the coupe, I noticed how restricted it is. Most of the stock piping seems to be flat..wtf LOL. I will let ya know what I can find out.

This is the design for the 02-06 Nissan SpecV's

Stock midpipe


Modified by D-Roll at 9:40 AM 5/29/2008

[LinkNuc]

might get ya 0.25 HP and lose 0.25 ft-lb

[D-Roll]

Naw...I had my specV dynoed and gained HP and TQ.

[LongBeachCoupe]

when i put in the nismo catback i saw that both of them were flat at the same point, where it tucks under that black support bar with the holes in it... idk

[nogears909]

wouldnt your stillen catback get rid of that flatness? or is this before the catback? i havent been under my car to take a look yet

[LongBeachCoupe]

well im not sure of all the exact names for the piping.. but when i got my nismo catback.. there were 3 pieces... the muffler.. and 2 long pipes.. the one thats closest to the front of the car... was flattened on one side (the side that faces up, or the body) for roughly a foot on both stock and nismo piping

[D-Roll]

The midpipe is the piece between the end of the header and the beginning of the cat-back.

[LongBeachCoupe]

if it looks like the pic in the OP... yes, its bent on 1 side... Id say the pipe starts around where the shift knob is...

idk if im being helpful or walking in circles

[D-Roll]

Im still waiting for a reply from tunerpros.com to see if they plan on making one for the coupe. If not, I'll have a local performance shop fab one for me.