Mesh Crew, Show Some Love!!

Post by **Driftless240** » Wed Mar 12, 2008 1:56 pm

Boy am I glad that I made this thread, it has BLOWN up and KEEP THEM COMING, weather is getting better; this thread better be pic whored up the arse!!!

Post by **tEknoS13** » Wed Mar 12, 2008 2:03 pm

thats true but, dont spacers tend to wobble at high speeds? if i do get spacers i would get the kicks (or watever they're called) or ichiba these actually look kinda safe.

Post by **DownSouthSlider** » Thu Apr 03, 2008 12:02 pm

the SSR's are back on, and ready to be shredded! i know i need to go lower now..maybe this weekend ill tweek the coils!

no the rears are not slicks....just gotta chew them up before i put on new tires! thank god its not my daily!

Post by **Nissan s12** » Wed Apr 16, 2008 4:14 pm

i HAD a set..but one was stollen off my 86 200sx!!

Post by **okinawa drift** » Wed Apr 16, 2008 5:52 pm

damn, you car looks sick!!! i've never seen this 2 tone combo!

Post by **DownSouthSlider** » Mon Apr 21, 2008 5:54 pm

okinawa drift wrote:damn, you car looks sick!!! i've never seen this 2 tone combo!

thx dude....its a family color combo...pops dually burben on bags is gonna be same colors...

Post by **DRIFTMUNKY** » Tue Apr 22, 2008 9:19 pm

My Silvia on American Racing Mesh
Modified by DRIFTMUNKY at 12:31 AM 4/23/2008

Post by **Kalypso** » Mon Apr 28, 2008 5:00 pm

Post by **MrFairlady** » Mon Apr 28, 2008 5:15 pm

heres my 16x8 4x114 MESH for sale:zer...d=225

getting out of teh mesh game.

Post by **hbpignosePA** » Wed Apr 30, 2008 9:54 am

questions for yall...

i got a set of enkei 92s waitin on tires

i want to get 205 up front and 225 in the rear

would i need to roll the rear fenders at all, im not really lookin to but i wanted some pictuars of this on someones car if anyone has em

Post by **moulton712** » Wed Apr 30, 2008 10:20 am

i just sold a set of old AME meshies, but...

my 93 coupe, SSR reverse meshies. i believe the rear is 7.5 wide with a 0 offset.

Post by **treken2t87** » Wed Apr 30, 2008 11:05 am

I got (3) enkei 92s (5 lug) for sale, 1 wheel has minor denthttp://forums.nicoclub.com/zerothread/333507

Post by **moulton712** » Wed Apr 30, 2008 12:44 pm

DownSouthSlider wrote:
no the rears are not slicks....just gotta chew them up before i put on new tires! thank god its not my daily!

have to love em, i raise my hand, cause i have some tires like that. i slap them on once in a while when i need more fun. burnouts etc..

Post by **macoupe** » Wed May 28, 2008 3:59 pm

Anybody know were to get some center caps 4 some Riken Meshies ?

Post by **AutoShadow** » Wed May 28, 2008 4:36 pm

Post by **Flicktitty** » Wed May 28, 2008 5:47 pm

Checking in.

Over the winter the rims are gonna get taken apart and getting the centers repowder coated Black and going to refinish the lips and WIDEN the rear rims 2" Epsilon Mesh 15X7 (Forgot the offset but you get the picture)

Post by **Flicktitty** » Wed May 28, 2008 5:54 pm

macoupe wrote:Anybody know were to get some center caps 4 some Riken Meshies ?

http://cgi.ebay.com/ebaymotors...19362&

there ya go. if you don't get them i might. i'm missin 2 center caps lol.

Post by **Kalypso** » Thu May 29, 2008 12:29 pm

the mesh crew runs sh*t

but i want some of these

Post by **aziankingz** » Thu May 29, 2008 1:08 pm

^ eewww get that non-mesh crap out of here! lol jk..

Post by **macoupe** » Thu May 29, 2008 3:23 pm

Flicktitty wrote:
http://cgi.ebay.com/ebaymotors...19362&

there ya go. if you don't get them i might. i'm missin 2 center caps lol.

No thanks. I'm only looking to buy one not four & kind of want it to say "Riken" on it... But wait if you buy them you can always sell me yours. Eh wat do you say?

Post by **Flicktitty** » Thu May 29, 2008 3:25 pm

maybe i'll have to think if i really care enough to spend 40 bucks on them lol

macoupe wrote:
No thanks. I'm only looking to buy one not four & kind of want it to say "Riken" on it... But wait if you buy them you can always sell me yours. Eh wat do you say?

Post by **twlnbro69** » Thu May 29, 2008 6:08 pm

My Mesh

Post by **gp_says** » Thu May 29, 2008 9:18 pm

Kalypso123 wrote:the mesh crew runs sh*t

but i want some of these

wow.

LOL.....

Post by **Kalypso** » Fri May 30, 2008 11:29 am

watch im gonna do it, and its gonna look good

Post by **scels240** » Sun Jun 01, 2008 1:35 pm

adrians_s13 wrote:lol... i knew there was gonna be a mesh crew sooner or later..enkei #92 F:15x7 +25 R:15x7+0pic of the black ones

pic of the gold ones

what r the rim size and tire size on the gold mesh

Post by **turbobrick** » Sun Jun 01, 2008 1:58 pm

I've had these wheels for like 9 months and I havent really used them much because they need new tires.

Post by **Flicktitty** » Sun Jun 01, 2008 2:02 pm

looks damn good, what are they?

turbobrick wrote:I've had these wheels for like 9 months and I havent really used them much because they need new tires.

Post by **Kalypso** » Thu Jun 05, 2008 10:01 pm

Post by **hbpignosePA** » Thu Jul 03, 2008 2:45 am

my mesh: enkei 92 15x7 0 offset yada yada....

Post by **maximumangle** » Tue Jul 22, 2008 7:28 am

what kind of HRE'S are these?! i MUST get a set for my 280 project!

leveloneae86 wrote:i have these HRE 3 piece meshies for sale locally. just wanted to share.

Mesh Crew, Show Some Love!!

Re: (tEknoS13)

Re: (tramp_drift240)

Re: (tEknoS13)

Re: (DownSouthSlider)

Re: (okinawa drift)

Re: (DRIFTMUNKY)

Re: (tramp_drift240)

Re: (MrFairlady)

Re: (hbpignosePA)

Re: (D*star)

Re: (DownSouthSlider)

Re: Center Caps

Re: Center Caps (macoupe)

Re: Center Caps (autoshadow)

Re: Center Caps (macoupe)

Re: Center Caps (Flicktitty)

Re: Center Caps (Kalypso123)

Re: Center Caps (Flicktitty)

Re: Center Caps (macoupe)

Re: Center Caps (Flicktitty)

Re: Center Caps (Kalypso123)

Re: Center Caps (gp_says)

Re: (adrians_s13)

Re:

Re: Re: (turbobrick)

Re: Re: (Flicktitty)

Re: Re: (Kalypso123)

Re: Mesh Crew, Show Some Love!! (leveloneae86)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums