Megan Racing?

[TruboostPerformance]

NICO members, you guys love MEGAN RACING , let us know what products you would like and we will get some great springs buys going here.

[onosqv]

mr downpipe.

gauges

[TruboostPerformance]

ok downpipes, any suspension? headers? test pipes, exhaust?

[AZhitman]

Derek -

I think the MR gauges are a 100%, guaranteed home run seller.

Coilovers, test pipes should do well also. Catbacks might go over well, but MR needs to address some QC issues first (plus ebay pricing is tough to compete with).

I think they have several items that will go over HUGE with our guys.

[NIGHTfall_240sx]

QC? quality control?

if so, i am going to have to disagree with you greg, i have not had any problems with quality with their products, i firmly support their products. many people dont because they believe they are cheaply made because they are a fresh company and started out on ebay

[onosqv]

QC? quality control?

if so, i am going to have to disagree with you greg, i have not had any problems with quality with their products, i firmly support their products. many people dont because they believe they are cheaply made because they are a fresh company and started out on ebay

It's because their catbacks are nowhere near the quality of brm exhausts .

But yes, I think most of MR stuff is ok. However, I have had problems. The rear lower tie bar for the s13, doesn't fit right, it's barely threaded on, at least for my car. MR was notified and they said "tough luck."

Their seats are very comfortable, but I've had issues w/ those too. 1 of the 2 seats I bought had a "popping" upper back rest. It was really weird and hard to describe, but it didn't happen w/ any other seats I tested. Good thing the place I bought it from let me exchange it, where the problem did not exist w/ the new replacement.

The only real complaint I have w/ MR is their lack of courteous customer support. I had a hella a time getting any support for the seats, the lower tie bar, and later for the gauges I bought that had questions on things like how to properly connect the wire to their pressure sender.

[austins240]

I got their short shifter a while back. it is pure crap. did NOT work on my car. was told to "Loosen the bolts" that hold it to the transmission. yeah, great, now the damn thing will fall apart driving down the road. even after loosening the bolts it still did not work. and it does NOT fit the stock shift knob as told. i only had luck with the STB, but still piss poor construction. better than i could do so i will not complain too much....hope they have gotten better.

[mmatl16]

Hook us up on some seats! whatever it takes to get it in a 240. all materials included for one price and any color.

ill buy that.

and im buying the suspension next week. is there any kind of gauruntee, etc

[onosqv]

Hook us up on some seats! whatever it takes to get it in a 240. all materials included for one price and any color.

ill buy that.

and im buying the suspension next week. is there any kind of gauruntee, etc

Hope you're under 5'10" and have a fastback (a lil more clearance than coupe). 240 + mr seats (or any of those styles reclinable bottom mount sparco) + sliders + brackets (wedge engineering, sparco, etc) will sit you +2" higher. W/o sliders will sit you 1" higher. I had a major problem w/ seats (not bcs of mr, but because of the seat design in general for those type of seat brackets - damn 240 hump), but I almost hit my coupe's sunroof as is w/ stock seats.

Just a little warning . If you are tall, I'd opt for some full bucket seats w/ bride super dooper low rails, mmmm, sexy, haha.

[mmatl16]

Im about 6'0 and I do have a hatch.

I dont mind sitting up a little higher...a friend of mine got S2K seats in his hatch and I like the way it sits.

[93180sxredtop]

i want the mr turbo mani fro the sr20det !!!!!!!

[TruboostPerformance]

ok guys we are getting a good feedback on seats, and turbo manifolds are always good, anymore?

[420sxse]

>>Hope you're under 5'10" and have a fastback

You still wouldn't be able to see past the rearview mirror out the Pass. side windshield very well. Directly-in-front way-down-the-road view is great, though. Bottom mount mount seats in the 240 are a bad combination. I even tried making some custom brackets to be absolutely as low as possible but I still can't wear a hat in my car (I'm about 5'9. (I don't have MR, but I can't see as any bottom mount would be acceptable...to me at least)edit: I do have a coupe though.

[TruboostPerformance]

Ok guys,MR 32 way Adj. Coilovers $840.00 MR guages $42.00MR downpipes $85.00

[yellowcell]

Hi Can i please purchase the MR gauges? I am looking for the Boost and the oil temp gauge. and how much would shipping be for overnight? please email me at [email protected] asap thanks.

[mmatl16]

is that 840 shipped?

[Florida240sx]

You've got my attention once again. Coilovers.....maybe blue racing seat...

[420in240]

How much for shipping those MR coilovers up to Canada? E-mail me [email protected]

[TruboostPerformance]

No those prices do not include shipping, just send us your zip's and we can give ya final pricing.

[smokey240sx]

this might be a stupid question to ask but could you order the seats without the logo?

[TruboostPerformance]

No you can not order the seats without the logo.

[reccakun08]

how much are the sr light weight pulleys?

[Florida240sx]

Been trying to get with you the past few days.Had you on AIM that one time but then customers came in.What time will you be available to talk on Monday?

[Henry G]

IM'd you about combined shipping on the MR DP, and MR coilovers shipped to 98520. Hit me up soon because I'm buying within a week.

[Florida240sx]

Why won't you talk to me been trying to get a hold of you for a while....Guess I need to call...

[Henry G]

?

[Florida240sx]

Had bad timing issues. Great person to deal with.I'll be calling next week for those gauges.MBC come in yet?

[Henry G]

I need to order these things, but I'm not getting a reply here or on AIM. Might have to buy elsewhere.

[Florida240sx]

If you call you can order easily.I talked to him at like 2AM on aim.They are to busy to get on the comp.Either send email or call.They gives us great prices.

[TruboostPerformance]

Hey guys sorry for the delays, we are a full installation,fabrication and tuning shop, we try to get online as much as possible, we have been seting up for our dyno install these past week and a half and gettting customers cars out. Hit us up via AIM or call. Thanks...