Measurement on a VG30 crankshaft

Discuss topics related to the VG and VE series engines.
2milehi
Posts: 3
Joined: Thu Oct 09, 2014 6:00 pm
Car: '90 300ZX

Measurement on a VG30 crankshaft

Postby 2milehi » Fri Mar 04, 2016 3:00 pm

First post - I searched this site and the internet for VG30 engine specs. I have not found any info for the diameter of a crank out of a '90 300ZX. I have found in the factory manual about difference between crank mains and rods with their corresponding bearing bores.

Thanks in advance.


2milehi
Posts: 3
Joined: Thu Oct 09, 2014 6:00 pm
Car: '90 300ZX

Re: Measurement on a VG30 crankshaft

Postby 2milehi » Thu Mar 10, 2016 5:21 pm

I called a good machine shop and here are the numbers for a standard crank.

Rod 1.9675 - 1.9667"
Main 2.4793 - 2.4784"


Return to “VG30 / VE30 Forum”