Maxima* cranks, no start

The club for Nissan Maxima and Infiniti I30 / I35 owners, and the official home of Maxima Club of America!
DMaxFox
Posts: 5
Joined: Thu Feb 01, 2018 5:06 am
Car: 04 Nissan Maxima 35se

Post

I am stumped. Got this 04 SE that I changed the water pump and thermostat, went to leak check and she cranks but no start, no spark, No fuel from EVAP, no codes. I've checked wiring, good ground and power. Fuses are good. Ecm relay swapped with lights, g2g. Any ideas???
Running out of YouTube videos.


amc49
Posts: 1183
Joined: Mon Jun 19, 2017 7:24 pm
Car: '11 Nissan Versa
'17 Nissan Altima

Post

If car ran before the work then look at the work.

?????? You only normally get vapor from evap, raw liquid fuel would be a problem...........

DMaxFox
Posts: 5
Joined: Thu Feb 01, 2018 5:06 am
Car: 04 Nissan Maxima 35se

Post

The car was towed to my place cause of distance and heat. I was told it started prior, should have checked prior to dismantle. I've gone through my work twice and cams are inline and the relay box is g2g with tight wires. Also, no rpm indication, noticed yesterday.

DMaxFox
Posts: 5
Joined: Thu Feb 01, 2018 5:06 am
Car: 04 Nissan Maxima 35se

Post

When I did the work I didn't rip into the intake area. Only removed relay box, coolant tank, eng mount abs battery.
Battery was out of the car for almost a month.

DMaxFox
Posts: 5
Joined: Thu Feb 01, 2018 5:06 am
Car: 04 Nissan Maxima 35se

Post

amc49 wrote:
Sat Feb 03, 2018 4:49 am
If car ran before the work then look at the work.

?????? You only normally get vapor from evap, raw liquid fuel would be a problem...........
Thanks. I messed up. appears bank 1 timing is off. should have known.
Any way possible to correct without taking the case off?

stokleyperformance
Posts: 9
Joined: Sun May 20, 2018 11:01 pm

Post

how do you know timing is off


Return to “Maxima Forum & I30 / I35 Forum”