master cylinder probz!

[ghostboy]

I have a 95 s14 non abs manual. brakes aren't exactly ideal. ive bled the brakes (in the correct order and everything) and to no avail can i get a nice firm brake pedal. so i think its my master cylinder. as said i have a non abs. friends got an abs master cylinder.is it possible to replace my master cylinder with an abs cylinder (Flame if needed! )

[OutToWinPAHC]

I think it has two ports and not three if I recall, but they are pretty cheap.

[sommmatt]

You can make an ABS master cylinder work, however it involves drilling and tapping an additional port. The easiest thing to do is order a 300ZX master cylinder. It has 3 ports, one of them plugged from the factory. Undo the hex plug or don't, depending on your set up.

[ghostboy]

what do you mean by setup, like not running rear brakes? sorry im a noob

[OutToWinPAHC]

Dont use a 300 master cylinder unless you have 300 brakes, the bias is way different. If your keeping S chassis brakes, just buy a master for the model you have.