manual transmission diagram?
manual transmission diagram?
hi....does anyone have or know a link where i can find the exploded diagram of a manual transmission of '95 nissan altima.....need to fix my input shaft bearing...i first need to know where it is located before i tear my trans apart....
Re: manual transmission diagram? (180fan)
shift control
Re: manual transmission diagram? (180fan)
thank you,,..this will sure hhelp me...going to replace my Inputshhaft bearing today.....i jst wann amake sure where to find it in there.
Re: manual transmission diagram? (180fan)
DO YOU HHAPPEN TO HAVE THE INSTRACTION ON HOW TO TEAR THIS APART? I TRIED TO TAKE THE BELLHOUSING OFF THHE TRANS, BUT SOMEHOW IT WONT LET LOOSE, SO I JST DECIDED TO PUT IT BACK AGAIN, AND INSTALLED...AND NOW, MY TRANS IS STOCKED IN FIRST GEAR.
Re: manual transmission diagram? (95ka24)
You gotta take the plugs and bolts out. Tap the bellhousing with something like a rubber mallet or put a wood block and hammer it. It'll take a few couple good strikes before the sealant gives in.
The attached pic should show you some of the extra plugs and what you gotta tap out before you go knocking at the bellhousing and ripping stuff.
The attached pic should show you some of the extra plugs and what you gotta tap out before you go knocking at the bellhousing and ripping stuff.
Re: manual transmission diagram? (180fan)
hey,,..thank you so much for all the help....but, i gave up before even checking your answer for my question:( ...i took my tranny to thhe nearest tranny shop here...that also served good, coz i really didnt hhave all the tools needed to actually tear this tranny apart-bearing puller.,pres., and taking this chance to repress the tranny withh new bearings...costing my a lot of mula, but, i think, its worth it...thx again...wondering if possible, you thhink you can give me the site/link to where i can get this diagram-intranstion to work on manual tranny, or if you can email it to [email protected]...? would be appreciated
sorry dude those were some pretty good scans off my fsm that I coughed up a bill for at the local dealer. My sister has a 95 altima so I gotta have an fsm. Dunno where to get the PDF though. Just something about dealing with files versus the real deal book I think. But with the PDF I'm sure it's online somewhere.
Yeah tranny work sucks. You gotta be careful of reverse threaded nuts and little balls. Too much hassle if you ask me...
Yeah tranny work sucks. You gotta be careful of reverse threaded nuts and little balls. Too much hassle if you ask me...
Find Your Forum!