Manual to automatic transmission conversion

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
ka-lin
Posts: 24
Joined: Tue Feb 27, 2007 8:56 am
Car: 1989 Nissan 200sx(European version) S13 CA18DET
Contact:

Post

Hello everyone,

My cars are euro spec 200sx S13 (CA18DET). I want to convert the one car from manual to auto because of city traffic jams.

What I need to do the conversion?That I already know to must have for sure are:

1. Auto tranny2. Auto ECU3. Prop shaft 4. Throttle from auto car5. The big brake pedal6. Auto shift lever, with it's cables and etc.

What do I miss?

Thanks for help!

p.s. Any piccies from automatic cars will be very interesting.



User avatar
ka-lin
Posts: 24
Joined: Tue Feb 27, 2007 8:56 am
Car: 1989 Nissan 200sx(European version) S13 CA18DET
Contact:

Post

anyone?

User avatar
supreamS14
Posts: 1046
Joined: Thu Jan 04, 2007 11:13 am
Car: 96 240sx S13-blacktop Sr20deT

Post

shifter cover platelower auto trans. harnessshift lock release cable+more... I know its harder to convert manual to auto than auto to manual. You might want to call some shops as I know there is a ecu for the auto trans and I know there is some wiring involved.

When you complete this please post results along with parts list and things needed to do as this is a rare thing to do and it could help me down the road! THANKX!!!

shift_jin
Posts: 111
Joined: Sat Sep 01, 2007 6:09 pm
Car: 2003 Nissan Sentra SER Spec V

Post

is there an auto trans for the ca18det?

Manchesterguy15
Posts: 19
Joined: Fri Jun 01, 2007 11:00 pm
Car: 1992 Nissan 240sx se 2-door

Post

If im not mistaken u can use a KA trans


Return to “240SX Technical Forum”