Manual -> Auto swap w/ SR20DET and Tyranny 1989 240sx

[Luvs2slide]

I searched and found the thread about the swap on a convertible, but nothing pertaining only to SR's. I'm about to do this swap and was curious if everything in this thread is good for the SR tyranny as well. Is there anything further I must do?

[180fan]

basically it's all the same. you're still gonna have to punch a hole in the firewall, gonna install a pedal, bleed the hydraulics, and wire up the reverse and switch at the pedal.

[Luvs2slide]

Ok thanks for the reply. Are you referring to the switch at the pedal which means you have to press down the clutch to start the car???

[180fan]

bingo