MAFS Wiring Order

[DJButton]

If someone can give me a hand I would be thrilled.

I'm looking for someone to just tell me the order in which the wires attach to the MAFS on an RB20. If you could let me know which color or pattern wire goes first, second, third and fourth. (Carl told me that the white in the shielded wire is the signal wire and the black is the ground I believe those two go first, but I'm not sure)

Thanks in advance.Dan

[DJButton]

Bump, any help guys? White signal then black ground from brown sheilded wire, followed by black with white line and silver dashes (second power wire) and lastly black with silver dashes, should be final ground. Correct??? Ehh???

[Carl H]

http://jimwolftechnology.com/w...S.PDF

wiring is the same for the rb20 maf, least in that order from left to right.

[blues14]

use Carl's link .........and here

A.Don't useb.Connect to black wire on rb20 maf loomc. Connect to black/silverd. connect to whitee. connect to black with white linef. Don't use

[DJButton]

Well it turns out my MAF was wired correctly after all... mehh

Anyhow I did check continuity on all four wires it went as follows:Black - .013Black/silver - .013White - 1 (flashing... not showing a continuity) White/black line - .628

Voltage test revealed:Black - 0Black/silver - 0White - .014White/black line - 13.7ish

Any thoughts, seems like something is out of place, I can't remember which wires should be open for continuity.

Thanks,Dan

[Sky80]

Ok, just for future reference and if someone searches and comes across this, i found this a while back cant remember where, but i added the RB20 to it as well just to make it more complete

[DJButton]

Great chart, this should be a valuable "search" item for those who do search!

[S13 240SX]

is this all the same for when using an n60 maxmia mafs on an rb20?

[DJButton]

That is what MAFS I am using, no difference when I hacked the plug to fit the stock RB MAFS, both are routed the same way as well as others I'm sure as well.