MAF Solution-94Q
MAF Solution-94Q
Like many postings about this frustrating problem, I seemed to finally find something that has work (at least for a while) and I thought I pass it along. Using an awl gently insert above each of the three section on the plug which results in pushing down the pins so the grab the male side on the MAF housing. (hope this is not old news)
-
elwesso
- Posts: 30810
- Joined: Sun Feb 23, 2003 4:52 pm
- Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT - Location: Indiana
- Contact:
Re: MAF Solution-94Q (rob1)
Thanks for posting this!!
-
Q451990
- Moderator
- Posts: 11030
- Joined: Tue Jul 23, 2002 8:21 am
- Car: 1990 Q45 - 118K, 2022 Toyota 4 Runner, 2004 Frontier M/T - 108K, 2012 Xterra (Mom's), 2023 Rogue (Inlaws)
- Location: Columbia, SC
- Contact:
Re: MAF Solution-94Q (elwesso)
So you're tightening the connector pins... I've done that before, and it works well - just don't think I posted it! I would add, be gentle - you don't want to tighten it too much...
Heath
Heath
Re: MAF Solution-94Q (rob1)
Ohhh, I'll have to try.