m37 to q70 conversion

[thrillseeker988]

Back in 2016 there was a thread on conversions. Has any completed a full conversion as of last year? If so, could you please provide a parts list that indicates what can be reused from m37 hatch, rear and front bumpers and whether or not around view could be activated?

[Ilya]

There was someone on FB who did it, but no one here has done it or documented the process.

[Infinitimaster]

I did the back only of my m37s the tail lights have to be re wired in order for them to work properly and a small adjustment for the lights to screw in but it's not to complicated most parts can found on eBay the front is also doable but the head lights are still
$1000 each
Lights $780 new
Trunk $360 OEM
Bumper $250 OEM
PAINT was $300
I also did the side rocker panels off the aero sport $300

[DoN_BLaZe34]

Could you elaborate on the wiring that was needed?

[Ilya]

Man, I miss the days of 'depot' lights for the Maxima being $100 for two...or less...on ebay. $1000 headlights...lol.

[Infinitimaster]

The color setup was different so I had to cut and test each wire to see which wire controlled what
Wasn't to hard just use a test light

[DoN_BLaZe34]

You mentioned the trunk in your list of parts needed. Is that the entire trunk lid or just the finish panel?