M-35 sport front lip

[jhuerto23]

So are we going to be able to buy these soon from you?

[TXT]

Sinister Extreme, quit playing with my heart over here! Everyone is on the edge of their seat waiting for your reply! haha

[sinister extremes]

Sorry for the delay, still under DR orders to take it easy until further treatment plan can be worked out.
Perhaps if someone here could take the helm and put together a group buy request we could put together a schedule and become a site vendor.
We really enjoyed having the first M at our shop, the chin spoiler is logging nearly a hundred miles of use a day and should return to our shop sometime next week for review. I have a number of additional pictures perhaps I should post them.

These cars are a designers dream, great lines and capable of so many looks, really very happy to see there are still owner groups that are looking to individualize their rides.

thanks,
all the best,
joe

[jhuerto23]

Sorry for the delay in answering, spent the last four days in the ICU, but home now able to start back to work tomorrow. Take care all,
all the best,
Joe

I hope all is well now. Sorry to hear that you spent some time in ICU. On another note, please put me on the top of the list. I would like to order one as soon as they are available. Keep us up to date.

Regards,
Jeff

[stm37s]

that looks really good, better than factory I'd say

[BOMDIGY]

Hello Everyone - Adding some more pics of Joe's amazing work and unbelievable attention to detail. Joe knows how picky I am with the little things when modding my cars and as always he over delivers! For those that are familiar with the original OEM lip you will pick up the changes immediately. The flow of the upper part of the lip around the bumper and how it is lined up with the body lines is much better and more parallel as it wraps around the fenders. The slight rise and smooth lines under the fog light bezel is one of my favorite touches. This was also designed to lay flush against the front fascia so that little rubber seal was not needed. Mine was slightly peeling overtime and had peeled back from the front fascia slightly due to normal wear and this AZ Heat! I can go on and on so if you have any questions feel free to shoot me a note. This thing turned out amazing and is a direct bolt up using the existing mounting points. Heading back to Joe in the next few days for him to do his final exam and repaint since it has been in test mode with lots of freeway travel.

BEFORE:






AFTER:

[jhuerto23]

Looks awesome, hopefully it will go on production soon.

[Twizz]

would you be willing to make the rest of the kit ?

[TXT]

Very interested. Would be cool if it came painted!

[wideopn11]

I'd like to see some stuff like state side. Some really nice splitters.
http://yoga.access-ev.co.jp/clib/index.jsp?id=180

[bicsintegra]

looks great!!!!! group buy sound like a good idea.

[sinister extremes]

Sorry for the delay in reply,
I have been addressing some health issues that have required full attention and lots of time.
I have a couple weeks to finish up some outstanding orders and existing projects then some time in the hospital and some recovery time will be required. I will put my full attention on this as soon as I am up to it.

if there is truly interest in a group buy let me see a list of those that are on board so I can make the decision to move forward on this issue and set aside funds to become a site vendor.

also someone posted a link to some very nice splitters, think we are going to enjoy spending some time looking into that as well.

The question of paint matching, yes that can be done.
as to the full kit, that is possible but not going to move in that direction until I see there is true demand for such an investment of time and resources.
Thanks,
Joe

[PlatinumM35]

I for one am definitely interested in purchasing a full kit if we can do a group buy. It may be worth the time and resources to make a full kit since the OEM Aero kit is practically unavailable.

[mdstahl1]

I'm in as well...just moved back to PHX

[wideopn11]

Count me in for some 2011+ love. I don't have the sport front end but this looks pretty awesome. I wonder how much effort would be involved to modify the M35 lip to fit the M37 front end. I wonder if the dimensions are close enough to modify without starting from scratch?

[Se@ttleM35S]

I'm down to buy the full kit. Let me know how much!
Can you do side skirt & rear lip similar to Vlene & OEM Aero combo?
I live in Seattle but I travel to Scottsdale several times a year.

[sinister extremes]

cant be much harder than making this entire front end

Count me in for some 2011+ love. I don't have the sport front end but this looks pretty awesome. I wonder how much effort would be involved to modify the M35 lip to fit the M37 front end. I wonder if the dimensions are close enough to modify without starting from scratch?

[Se@ttleM35S]

Awesome work bro! So when do you think you'll be able to start on this project? Concept pics and est. cost would be great! Also, if you wouldn't mind posting a "group buy" listing to gauge interest now, I'm sure that'll prove worth while.

[sinister extremes]

Awesome work bro! So when do you think you'll be able to start on. this project? Concept pics and est. cost would be great! Also, if you wouldn't mind posting a "group buy" listing to gauge interest now, I'm sure that'll prove worth while.

Hello to all,
I need to take a moment to address a couple things.

I have been ill for quite a while, as I seem to always be too busy to take any time off I just put up with everything that ailed me. After watching me suffer and dwindle away for quite some time BOMDIGY took the time to sit me down and demand that I see a Dr asap. I agreed and a couple days later when symptoms got as bad as they get I went to the ER.
I think I was there for about three minutes and they took me right up to the ICU.

Since that last week of june I have spent most of my time scheduling or visiting specialist after specialist. I have surgery scheduled next week and most likely many more to follow. Cancer is a b****....


all that said, I have a little much on my plate and I am limiting my work schedule.
I have reached an agreement with a friend to have molds made and until I am on my feet and have the all clear I will be limiting projects to those that have enough interest to warrant expending time on them.

If you are interested in having a group buy send me a pm and I will start the list.
once I have enough people on board to move forward I will let everyone know.

Thanks,
Joe

[Larz]

Joe I'm sorry to hear that news. Please keep yourself positive, put your health at the top of your day-to-day and push work and stress to the back burner. Please heed the advise of your docs and be willing to change your stress levels, diet, and resting time to focus your efforts on beating this. I genuinely hope that you can get through this with the least discomfort possible and return home with the best possible outcome. Sending you good thoughts !

[jmichael97]

man my dad has cancer too and he beat it numerous times, and you can too. i wish you the best and you come back here and talk with us about the cars when YOU are ready to... guys we should wait on him, and stop bugging him about it... clearly he has something way more important to concern himself with... take care joe!

[sinister extremes]

man my dad has cancer too and he beat it numerous times, and you can too. i wish you the best and you come back here and talk with us about the cars when YOU are ready to... guys we should wait on him, and stop bugging him about it... clearly he has something way more important to concern himself with... take care joe!

Well thanks for the thought, but I still have to keep a business growing, and in this economy that requires arranging things so no matter what happens your business stays open.

I have all the help I need to keep things moving, and I will have 10 days of recovery starting next week to sit in front of my laptop and follow up on any requests.

All the best,
Joe

[flex128]

Any news if they are selling this part I'm interested in buying i cant seem to pm

[sroks5]

Joe,

I hope your recovery is going well. Please put me on the list for the full kit. Thank you. I don't have a pm so you can email me at sroks5@hotmail if you need to contact me. Thanks again for your efforts.

[gmoney35s]

Is this still available ill be heading AZ in January to start school would definitely be something to check out pm if you would please on more details

[sinister extremes]

Greetings to all,
I have spent the last week sitting in a dang lazyboy chair trying to heal up. Still very sore but think it is time to start getting things back to normal at the shop.

That being said, I will review this thread and start answering everyone sometime tonight and over the next few days.

Hope all enjoy the Holiday weekend, if you have travel plans I Pray you and yours are kept safe and well as you do so.

All the best,,
Joe

[gmoney35s]

Glad to hear that your at least taking it easy man stay well got your pm I sent you and email and another pm

[bigantm109]

test fit on one owners car.





still looking to find someone to test fit on so the offer is still open.
thanks,
Joe

can you make the body kit if so give me a call at 215 400 0677 anthony

[bigantm109]

loooks good to me