Lowering Kit for Rogue

[Jok3rz]

I know there is a H&R lowering kit for Rogue, but only lowers vehicle 1.4 inches. Anybody know an alternative vehicle placement would work on the vehicle! For Ex. Maxima or Rogue! Or even Versa, Trying to lower at least 2 inches

[SenorPayne7]

I have an H&R spring set for my rogue, but they werent made for the rogue, and it dropped about 2 inches on both sides.... check this out

post5936685.html?hilit=sport%20springs#p5936685

[philipa_240sx]

I know there is a H&R lowering kit for Rogue, but only lowers vehicle 1.4 inches. Anybody know an alternative vehicle placement would work on the vehicle!

The Rogue does not share it's suspension with any other Nissan. Substituting suspension parts from another car could be very dangerous. DO NOT attempt this.

The H&R kit is the only one available. Originally developed for the Qashqai (The Rogue's twin brother) in the Europe, but is now available here in North America for the Rogue.

The reason you do not see HUGE suspension drops in aftermarket springs is simple:

Dropping more than 2" can negatively affect the handling of the vehicle and make wheel alignment near impossible. Without custom suspension modifications (drop spindles, custom control arms, etc) you can create a very dangerous and ill handling vehicle.