low-level bolt-ons...

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Project S13
Posts: 248
Joined: Thu Nov 11, 2004 10:44 am
Car: Nissan 240SX Fastback

Post

Hey guys, had a short question for those with some exp. with the SR. I hope to get a swap eventually, but I'm not going to be able to afford it for a while. I was wondering are there any simpler upgrades that can be done to my KA that I could also use on an SR after I do my swap, like intake, cat-back exhaust or something? I won't be affording the swap for a while but I'd like to feed my need for upgrades every now and then. My KA engine is stock so far, because I don't want to waste money I could have used on SR upgrades later ya know?

Sorry to be asking a newbish question, I have researched the individual engines but I don't know very much about transferability. Thanks guys.


splmark
Posts: 2
Joined: Thu Nov 11, 2004 12:21 pm

Post

fuel pump, cat-back, nismo mounts, el. fan, shocks, sprins

splmark
Posts: 2
Joined: Thu Nov 11, 2004 12:21 pm

Post

oh and also get a lsd

Doomed2Walk
Posts: 1083
Joined: Sat Jun 21, 2003 7:39 pm
Car: 2005 Subaru Impreza WRX STi WRBP on gold
Contact:

Post

You could upgrade to a Z32 fuel pump and fuel filter, buy nismo mounts, even if you don't want to install them yet. The cat-back, s-afc ii. Rather than upgrading under the hood, you should upgrade the corners (suspension, brakes) as those will not be effected by whatever motor that's under the hood.

User avatar
Project S13
Posts: 248
Joined: Thu Nov 11, 2004 10:44 am
Car: Nissan 240SX Fastback

Post

thanks for your input guys. I'm already sitting on struts/springs, pillowball adjustable upper mounts, and strut tower bars (sway bars on the near future list), suspension is the main thing I've been focusing on, but it does seem a bit strange to run around with the stock exhaust, so i got curious about engine stuffs. =p


Return to “SR20DET Forum (rear-drive)”