LoveFab manifold review!

Post by **dwnshfter** » Fri Feb 22, 2008 5:54 am

any updates? i would also like to see some dyno numbers....

Post by **matafied** » Fri Feb 22, 2008 6:15 am

omg!!! I WANT ONE

Post by **Yellow4g63** » Fri Feb 22, 2008 6:36 am

Darius wrote:Very nice construction as always expected from Full-Race. Seeing properly designed, manufactured, and tuned manifolds always gives me a chub.

The A/C manifold is not a tuned, equal length manifold like the original design, right? Just wondering because runner 3 looks longer than runner 5 and has a few extra bends to get around the collector which would add head loss.

It's Love Fabs not Full Race lol.

Post by **Darius** » Fri Feb 22, 2008 6:59 am

OMG WTF am I thinking? Kids don't drink alcohol. I think I'm just going to edit that part out to save a little dignity.

Post by **until240** » Fri Feb 22, 2008 8:28 am

Darius wrote:
The A/C manifold is not a tuned, equal length manifold, right? Just wondering because runner 3 looks longer than runner 5 and has a few extra bends to get around the collector which would add head loss.

Modified by Darius at 11:01 AM 2/22/2008

yes that is correct. however, in defense of this manifold, here's what cody said in an email about equal length manifolds...

"The manifold is within 1" or so of equal length. The prototypes are always a little bit off so during final fixturing I should be able to get this very close to equal length. As far as power/spool differences, in my experience, the differences have to be 4-6" to have any negative impact. Even then, the impact is within 2-3%, and usually only designated to the upper RPM extremes. "

Post by **HxC_Nismo** » Fri Feb 22, 2008 3:15 pm

i want to see this installed in an s chassis with the turbo and wastegate installed

Post by **until240** » Sun Feb 24, 2008 11:27 am

hah! yeah right...i'm just a poor college-student slowly piecing together my new turbo system...same old story. i'm hoping to have this done by next year ::fingers crossed!::

Post by **74260zt** » Tue Apr 15, 2008 6:20 pm

Is there going to be a run on these manifolds again? I'd like one with the turbo up further towards the front of the motor like I saw in one of those pics. Like this....

Please let me know if getting one of these is still possible.

Post by **Tinker219** » Thu Apr 17, 2008 1:41 pm

If you don't mind a slight waiting period, we can build you the non AC version for the GB price. Please email me as I don't get to frequent the forums as much as I'd like. Also, if you're looking at the China manifolds, save yourself the installation time and manifold $. They will break.

[email protected]

Thanks,

Cody

Post by **HxC_Nismo** » Thu May 01, 2008 6:42 pm

what wastegate flange does this manifold use? and also i just looked on the lovefab website and there giving a lifetime warranty on there manifolds from breaking wich is saying alot. let me know when you plan on doing the group buy so i can put money away for one.

Post by **Shocker** » Fri May 02, 2008 3:16 am

HxC_Nismo wrote:what wastegate flange does this manifold use? and also i just looked on the lovefab website and there giving a lifetime warranty on there manifolds from breaking wich is saying alot. let me know when you plan on doing the group buy so i can put money away for one.

I'm sure they'd use/offer any flange that you might need. You'd just have to specific during your ordering process.

Post by **SuicidnS13** » Sat May 03, 2008 2:24 pm

Tinker219 wrote:If you don't mind a slight waiting period, we can build you the non AC version for the GB price. Please email me as I don't get to frequent the forums as much as I'd like. Also, if you're looking at the China manifolds, save yourself the installation time and manifold $. They will break.

[email protected]

Thanks,

Cody

Holy crap its cody! Damn man finally you are building nissan stuff. This man is amazing. He is one of the top manifold builders in the country. Just do a search for him on Honda-Tech and you will see guys. His work is top notch.

THUMBS UP TO LOVEFAB!!!!

Post by **RizzoTK** » Mon May 19, 2008 8:10 pm

I might be interested in this group buy. any details?

Post by **74260zt** » Fri Sep 19, 2008 6:09 pm

Nobody else bought one of these bad boys? It's been a 1/2 a year since everyone was getting a hard on for one of these.... some one has bound to of tried one out by now, huh? Lets hear about them...

Post by **Coolwhip** » Sat Sep 20, 2008 2:35 am

Post by **74260zt** » Sat Sep 20, 2008 7:38 am

Coolwhip wrote:

I give up.... I don't speak icon.... lol what is that suppose to mean

Post by **Coolwhip** » Sat Sep 20, 2008 7:49 am

74260zt wrote:
I give up.... I don't speak icon.... lol what is that suppose to mean

Hey joel, hit me up on AIM if your online, bboy coolwhip1

Post by **74260zt** » Sat Sep 20, 2008 9:40 am

Coolwhip wrote:
Hey joel, hit me up on AIM if your online, bboy coolwhip1

Sorry, don't use that. Google chat or email me at rb26powered74zcar at gmail.com

Post by **Darius** » Mon Sep 22, 2008 4:24 pm

74260zt wrote:Nobody else bought one of these bad boys? It's been a 1/2 a year since everyone was getting a hard on for one of these.... some one has bound to of tried one out by now, huh? Lets hear about them...

Everybody had boners until they saw the price tag inflated about 75% from what was originally expected.

Post by **streamtime** » Tue Sep 23, 2008 6:49 pm

That manifold looks pretty crazy!

I actually had a full lovefab kit on my car everything was super quality. Seems expenisve but im sure its worth it for what it will gain.

LoveFab manifold review!

Re: LoveFab manifold review! (QuickerThanU)

Re: LoveFab manifold review! (dwnshfter)

Re: (Darius)

Re: (Yellow4g63)

Re: (Darius)

Re: (until240)

Re: (HxC_Nismo)

Re: (until240)

Re: (74260zt)

Re: (Tinker219)

Re: (HxC_Nismo)

Re: (Tinker219)

Re: (RizzoTK)

Re: (74260zt)

Re: (Coolwhip)

Re: (74260zt)

Re: (Coolwhip)

Re: (74260zt)

Re: (Darius)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums