Looking for some1 in NJ that can do a motor swap

Post by **cubiche1827** » Wed Mar 31, 2010 10:23 am

So it seems that I have to give up on trying to fix my engine, it seems that either a cam or a valve bent and then engine is just not moving. Now what I need is someone that can do the engine swap for me. Right now the car is n/a and I'm gonna be putting a tt engine. So if anyone knows someone I can take it to that has done the job before I would be very appreciated. TY.

Post by **carlosyiyo3011** » Mon Apr 05, 2010 3:57 pm

AZ MOTORSPORT IN GARFIELD NJ MIDLAND AVE I FORGET THE #

SORRY

Post by **vulcanrush** » Tue Apr 06, 2010 11:45 am

i've heard az sports isn't that great.

if price isn't an issue, you can look up rich at rdz.com and alex o'ree in princeton, nj.

Post by **cubiche1827** » Thu Apr 08, 2010 8:20 am

Well money is a lil bit of an issue I'm just trying to take advantage of a situation figured since my engine was seized and have to swap it out anyway that it be a better idea to just swap it with a TT engine, but not trying to go broke over it either, btw ty guys I'll try to contact those ppl you recommended.

Post by **Initial_R90** » Thu Apr 08, 2010 8:59 am

I could do it.

Post by **cubiche1827** » Thu Apr 08, 2010 9:26 am

Well for the moment I have a friend that says he can do it and he's quoting me about 2k for the labor so now I'm kinda searching to see how I can get everything I need, so far the best thing I've been able to find is a place called JDM Engine Depot, they said that can order me a front clip for about 3.2k. Just trying t see if their are any other alternatives at the moment.

Post by **car nut** » Thu Apr 08, 2010 2:15 pm

Initial_R90 wrote:I could do it.

You ever work on a Z32?

Post by **vulcanrush** » Fri Apr 09, 2010 9:39 am

cubiche1827 wrote:Well for the moment I have a friend that says he can do it and he's quoting me about 2k for the labor so now I'm kinda searching to see how I can get everything I need, so far the best thing I've been able to find is a place called JDM Engine Depot, they said that can order me a front clip for about 3.2k. Just trying t see if their are any other alternatives at the moment.

i went to jdmenginedepot.com in kearny, i thought they were ok.

3.2k for a front half seems reasonable, conceptzperformance.com charges about the same, including mailing.

get a compression # though, don't be stupid like me.

Post by **Initial_R90** » Mon Apr 12, 2010 10:35 am

a couple. never done a z32 swap but i would think it wouldnt be to much harder then others ive done

Looking for some1 in NJ that can do a motor swap

Looking for some1 in my area that can do a motor swap

Re: Looking for some1 in my area that can do a motor swap (cubiche1827)

Re: Looking for some1 in my area that can do a motor swap (carlosyiyo3011)

Re: Looking for some1 in my area that can do a motor swap

Re: Looking for some1 in my area that can do a motor swap (cubiche1827)

Re: Looking for some1 in my area that can do a motor swap (Initial_R90)

Re: Looking for some1 in my area that can do a motor swap (Initial_R90)

Re: Looking for some1 in my area that can do a motor swap (cubiche1827)

Re: Looking for some1 in my area that can do a motor swap (car nut)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums