Looking for aluminum adaptor plates

Post by **420_240** » Sat Sep 25, 2004 8:28 am

Apparently the motor i have is from a surfer o wagon?...... anyways.... i need the aluminum block adaptor plates to make my Mckinney mounts fit....otherwise i'm just stuck....any help out there?

Post by **JonPowell** » Sat Sep 25, 2004 9:28 am

Cefiro---RB20DET?

Is that what you are talking about?

Post by **420_240** » Sat Sep 25, 2004 10:45 am

i sent a pic of the adaptor plates to mack ....he said they "looked" like they were from a surfer o wagon?....... but it's an rb25det (cam bump on timing cover/ side feed injectors).....all i need to know is how to get ahold of or where i can find rb25det aluminum adaptor plates so i can get my mckinney mounts to fit...... any one have a clue where to get these???????????

Post by **NISMO_RB25** » Sat Sep 25, 2004 3:10 pm

You might try venus-auto.com

Post by **anumeric** » Sat Sep 25, 2004 4:00 pm

Stagea?

Post by **420_240** » Sun Sep 26, 2004 9:05 am

the aluminum adaptor inbetween the Mckinney mount and the block is what i need

Post by **Nameless EJ6** » Sun Sep 26, 2004 12:07 pm

That's an engine mount bracket.

Post by **420_240** » Sun Sep 26, 2004 6:51 pm

any ideas where to find these cause i'm in desperate need....... can't finish my install w/o them and that's basically all i need!!!

Post by **JonPowell** » Mon Sep 27, 2004 2:00 am

Did you try gettinga hold of TOP HAT like I suggested?

Post by **420_240** » Mon Sep 27, 2004 8:05 am

I tried to send an email to the only address i could find on the website....i couldn't find a phone number tho..... are all the rb mount brackets the same?...could i use a set from an rb20?......Still no luck i'm still searching for them

Post by **420_240** » Mon Sep 27, 2004 8:18 am

Everytime i try to email mike ...i get an email back saying it was failed to be delivered

Post by **Stealth-Z** » Mon Sep 27, 2004 9:09 am

I have a set of those aluminum kind. And a set of the steel ones to
Modified by Stealth-Z at 12:28 PM 9/27/2004

Post by **420_240** » Mon Sep 27, 2004 10:01 am

you wanna get rid of the aluminum??? my email addy is [email protected] me some pix so i know it's the kind i need

Post by **accel junky** » Mon Sep 27, 2004 2:40 pm

I think he meant Cefiro

Post by **JonPowell** » Mon Sep 27, 2004 3:37 pm

I asked that in the first post, but apparntly no...its a surfer o wagon!

Post by **420_240** » Mon Sep 27, 2004 4:56 pm

Sorry I got the spelling wrong, actually Mack spelled it "Sufer'o Wagon". But I believe the correct spelling is cefiro after looking into it.
Modified by 420_240 at 10:14 PM 9/27/2004

Post by **420_240** » Mon Sep 27, 2004 6:30 pm

What a little kid

Looking for aluminum adaptor plates

Looking for aluminum adaptor plates

Re: Looking for aluminum adaptor plates (420_240)

Re: (420_240)

Re: (Nameless EJ6)

Re: (420_240)

Re: (JonPowell)

Re: (420_240)

Re: (420_240)

Re: (Stealth-Z)

Re: (accel junky)

Re: (JonPowell)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums